Instructions / Assembly

1
st
: Install and align the cam locks ⑨ into panels Ⓓ, Ⓔ, Ⓕ and Ⓛ in the locations
indicated.
2
nd
: Assemble the main panel Ⓐ to panels Ⓓ, Ⓔ, Ⓕ and Ⓛ as shown and as explained in
page 4.
STEP 14 Join the upper divider panel Ⓕ to the middle shelf Ⓒ as shown (wooden pins enter in the
holes).
(This view shows the unit in
the normal upright position)
STEP 15
Hardware:
❾
Cam lock
8
Pcs
SEE PAGE 4
MAKE SURE TO
ATTACH THE BOLTS IN
THE CORRECT HOLES.
Attach the cam bolts ⑨ to the corresponding holes on the panels Ⓚ1, Ⓚ2, Ⓘ and Ⓙ as
shown, but make sure to use the correct holes as some are intended for other kind of
hardware in subsequent steps.
STEP 16
Hardware:
❾
Cam bolt
16
Pcs
P.10
RTA-8807
P.10
(Front)
(Front of panel Ⓐ has
the wooden pins, the
back has the grove)