Instructions / Assembly

STEP 24
Screws:
❹
3.5x15mm
8
Pcs
❺
4x38mm
10
Pcs
⓱
“L” sliders
2 Left
2 Right
For each the drawer:
1
st
: Use screws ⑤ to assemble the back panel Ⓢ to the side panels Ⓠ and Ⓡ from the
sides, and to the support bar Ⓣ from the back.
2
nd
: Assemble the “L” shaped sliders ⑰ to the side panels Ⓠ and Ⓡ using screws ④
as shown.
LEFT
RIGHT
VERY IMPORTANT ABOUT
THE SLIDERS!
INCORRECT:
Raises the
drawer 1” and
won’t fit!
CORRECT:
Sliders don’t
protrude on
the bottom.
(This view shows the drawer
with its front facing DOWN)
THE WHEEL GO
AT THE BACK
STEP 25
Hardware:
❿
Caps
4
Pcs
⓭
Handle
2
Set
For each drawer, assemble the handles ⑬ to the front panels Ⓞ, and Ⓟ respectively,
using the screws that come with them, then cover the screws with the plastic caps ⑩.
HANDLE OPENING
FACES DOWN
P.14
RTA-8807
P.14