Instructions / Assembly

Use screws ④ to assemble the plastic bases ⑫ to the panels Ⓓ and Ⓔ.

STEP 5

Hardware:

❹

3.5x15mm

Pcs

⓬

Base

Pcs

STEP 6

Separate all the sliders pieces ⑰ according to their shape (no assembly is done here):

-The “Flat” ones go on the side panels of the unit and will be used on the next step.

-The “L” shaped go on the drawers and will be used until step 24, please set them aside.

“FLAT”: Use on next step

“L shaped”: Use until step 20

(2 Sets, total 8 pcs:

4 flats, 4 L shaped)

RIGHT

LEFT

Using screws ③, and paying close attention to the orientation of the parts, assemble:

• One of the right flat sliders ⑰ to the plastic bases ⑫ on panel Ⓔ.

• One of the left flat sliders ⑰ to panel Ⓛ.

• The remaining flat sliders ⑰ to panel Ⓖ on both sides of the panel.

STEP 7

Screws:

❸

5x8mm

Pcs

⓱

Flat

sliders

2 Left

2 Right

Flat, Right

Flat, Left

Flat, Right

Attach the sliders on both sides.

P.7

RTA-8807

P.7

(Use 2 screws)

ON ALL THE SLIDERS THE WHEEL

FACES DOWN AND TOWARDS THE FRONT