Instructions / Assembly
Table Of Contents
- RTA-8850 Page 0 (Front cover) (REV-6-FP-7812-1223)
- RTA-8850 Page 1 (Main Parts list) (REV-6-FP-7812-1223)
- RTA-8850 Page 2 (Parts layout, Hardware List) (REV-6-FP-7812-1223)
- RTA-8850 Page 3 (Tips and warnings) (REV-6-FP-7812-1223)
- RTA-8850 Page 4 (Steps 1, 2, 3) (REV-6-FP-7812-1223)
- RTA-8850 Page 5 (Steps 4, 5) (REV-6-FP-7812-1223)
- RTA-8850 Page 6 (Steps 6, 7) (REV-6-FP-7812-1223)
- RTA-8850 Page 7 (Steps 8, 9) (REV-6-FP-7812-1223)
- RTA-8850 Page 8 (Steps 10, 11) (REV-6-FP-7812-1223)
- RTA-8850 Page 9 (Steps 12, 13) (REV-6-FP-7812-1223)
- RTA-8850 Page 10 (Step 14, All Done) (REV-6-FP-7812-1223)
- RTA-8850 Page 11 (Weight limits, Warnings, Care) (REV-6-FP-7812-1223)
- RTA-8850 Page 12 (Warranty - TV Stands - 2yr) (REV-6-FP-7812-1223)
P.3 P.3
RTA-8850
BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS.
M6
30mm
M6x30
• Make sure you understand which
hardware will be used on each step. Using
the wrong size of screw, bolt or pin might
strip the threads or cause damage to the
part in which it is being used.
• To avoid misalignments, always leave the screws
loosely and do not tighten them until all the pieces
are positioned correctly.
• Do not overtighten or force the screws as they might
break, strip, damage the threads of the holes, or get
stuck inside the parts.
• If the hole seems to small for the screw, make sure
you are using the correct size of screw and/or that
you are installing it in the correct hole.
• Sometimes on the wood panels the laminate or
material might be covering the hole partially or
entirely, if there is no visible hole or if it looks too
small, pass and press the tip of your finger over the
area to feel its indentation, and carefully pierce the
laminate to uncover the hole underneath.
• Do not discard this manual or any of the packaging
material until the unit is completely assembled.
• Please read the assembly instructions throughly and
follow step by step.
Thank you!
1
2
Leave loose,
tighten all together
√
√
• The assembly might require of 2 persons for certain
steps. Before you start the instalation, make sure there
is someone else nearby to help you.
Do not
overtighten
• Please be kind to our planet, when done with the
assembly, recycle any of the packaging materials
that is accepted by your city or recycling service.