Instructions / Assembly

P. 1 3
RTA-910TV
P.13
•
•
Insert the door 9 into the unit by engaging first the top glides K into
the top sliding track 12, then engage the bottom rollers K into the
bottom sliding track 12.
Secure the bottom rollers K to the door 9 by tightening the screws
from inside the unit.
With the help of another person, use a minimum of 12 nails M and a
minimum of 4 junction plates L to attach the bottom back panel 10 and
the top back panel 11 to the back side of the unit.
Important:
• The panels don’t cover the back completely, so make sure to align
and center with all sides.
• Use the plates L in between the two panels only.
• Center the nails on the panels, if they go too close to the edge of the
panel, it could split the wood.
• Make sure the nails enter as straight as possible into the panels. If
they go slanted they could split the wood.
(Front)
(Back)
STEP 15
Hardware:
STEP 16
Hardware:
L
12
to
50
Pcs
M
Junction
plates
4
to
10
Pcs
(NOT INCLUDED)
9
K-Roller
K-Glide
N
First insert top glides
into top track
Then insert bottom
rollers into bottom track
Last tighten the screws
from inside the unit
(NOT INCLUDED)
12
11
10
M
Nails