MODERN 2 DOOR TV STAND MODEL RTA-940TV ASSEMBLY INSTRUCTIONS REV-2-CMN-8008-0324 Thank you for purchasing our product
RTA-940TV P.1 Do a quick inventory of all the parts and hardware listed below. For Support, assembly questions & Replacement Parts within the 48 Contiguous United States: Please email us at: support@rtaproducts.com P.1 Replacement Parts for International Customers & AK-HI-PR orders: RTA Products will replace the part free of charge, while the customer is responsible for shipping costs plus any International local taxes or duties.
RTA-940TV P.2 P.
P.3 RTA-940TV P.3 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Do not discard this manual or any of the packaging material until the unit is completely assembled. • Please read the assembly instructions throughly and follow step by step. • The assembly might require of 2 persons for certain steps. Before you start the instalation, make sure there is someone else nearby to help you. • Make sure you understand which hardware will be used on each step.
RTA-940TV P.4 P.4 THE ASSEMBLY STEPS START ON NEXT PAGE CAM BOLT AND CAM LOCK TUTORIAL THE INSTRUCTIONS BELOW ARE NOT ACTUAL ASSEMBLY STEPS This unit uses cam bolts and locks (also known as mini fixes). If you are not familiar with this kind of hardware, the below is a tutorial that explains how to use them on the steps where they are required. 1. Screw the bolt into the indicated hole on the panel indicated in the assembly step. 2. Join the other panel (with the big hole) to the panel with the bolt.
RTA-940TV P.5 P.5 ASSEMBLY STEPS WE RECOMMEND TO PLACE THE PIECES OVER BLANKETS TO PROTECT THEIR FINISH DURING ASSEMBLY. STEP 1 Install the wooden dowels D into the indicated holes on panels 2, 3, 6, 7, 8, 9 and 10. Hardware 26 Ø6x30 Wooden Pcs dowel Tools (Not included) D OR D STEP 2 Install the bolts B into the indicated holes on panels 1, 4, 5, 7, 9 and 11.
RTA-940TV P.6 P.6 STEP 3 Hardware C 2 Cam lock Pcs With the pieces placed oriented as shown, ensamble the partition panels 7 and 9 to the shelf 8 with cam locks C as explained in the TUTORIAL PAGE. OR (Top) Tools (Not included) ) ) rface su ottom (Top) (B (Bottom) (Bottom) (Front ) (Back C Alignment STEP 4 Hardware 2 Cam lock Pcs Tools (Not included) OR Alignment (Back) The 4 panels will be flushed at the back.
RTA-940TV P.7 STEP 5 Hardware I M3.5x12 8 Pcs P.7 Pay attention to the orientation of the fixed hinges G, and attach them to the side panels 6 and 10 with screws I. I op (T (Back) 4 Fixed hinge Pcs Tools (Not included) G ) G (B ot OR ) m to (Front) to ot (B m nt) ) (Fro op (T ) (Front) STEP 6 Assemble the side panels 6 and 10 to the top main panel 11 with cam locks C.
RTA-940TV P.8 STEP 8 Hardware E Glide 8 Pcs P.8 On the indicated profile of the skirting boards 1 and 4 install 2 pieces of the glide feet E using nails J at approximately 2" from each end, then another 2 pieces E in the middle at equidistant length. 8 J Pcs Nail Tools (Not included) 2" from each end OR 1 STEP 9 Cam lock 4 Assemble the skirting boards 2 and 3 in between the skirting boards 1 and 4 with cam locks C as shown.
RTA-940TV P.9 H J Juntion 10 Pcs Nail 52 Pcs L Color #1 M Color #2 2 Pcs (B FIRST: Flip ott 4 Pcs 6 Tools (Not included) OR 10 ) DON'T FORGET TO USE A BLANKET FOR PROTECTION OF SURFACES (To 11 p) 15 16 17 (Top) 11 SECOND 18 om (Front) Hardware • FIRST, and with the help of another person, carefully flip the unit over its front.
RTA-940TV P.10 P.10 STEP 12 Hardware K Double tape 40 Pcs • FIRST place the decorative panels 13 and 14 upside-down and carefully peeloff and attach to each of them 20 pieces of the double-sided tape K, but DO NOT PEEL OFF on the top side until ready to join with doors 12. • THEN place the doors 12 with the big holes facing down, and side by side. • THEN carefully peel-off the tapes from 13 and 14.
RTA-940TV P.11 STEP 14 Tools (Not included) OR P.11 • FIRST, inside the unit loosen up the middle screws on the fixed hinges G, and on the doors 12 tighten the screw on the hinges F just a little bit to allow both pieces of hinges to connect well one to another. • THEN, install the doors 12 to the side panels 6 and 10 on the unit by connecting the articulated hinges F to the fixed hinges G, and tightening the screws on G.
RTA-940TV P.12 P.12 WEIGHT LIMITS 2.2 Lbs (1 Kg) 42 Lbs (19 Kg) 6.6 Lbs (3 Kg) WARNINGS • Always pay close attention to small children playing near the unit or when they are watching TV very close to it to prevent tip-over accidents. • Do not exceed the indicated weight limits. • Do not expose the surfaces to direct sunlight or to extreme environmental conditions. • Do not use solvents or abrasive materials to clean the unit. • Do not sit on the unit or lean against it.
P.13 RTA-940TV TECHNI MOBILI WARRANTY TV Stand/Entertainment Center: 2 YEAR WARRANTY RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA Products or its authorized resellers that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein. "Defects" as used in this warranty, is defined as any imperfections that impair the use of the furniture or product.
