Instructions / Assembly
Table Of Contents
- RTA-940TV Assembly Instructions (REV-2-CMN-8008-0324)
- s Page 1 (main parts list)
- s Page 2 (Layout, hardware)
- s Page 3 (tips)
- s Page 4 (Cam Bolt-Lock tutorial)
- s Page 5 (Steps 1, 2)
- s Page 6 (Steps 3, 4)
- s Page 7 (Steps 5, 6, 7)
- s Page 8 (Steps 8, 9, 10)
- s Page 9 (Step 11)
- s Page 10 (Steps 12, 13)
- s Page 11 (Step 14)
- s Page 12 (Weight limits, Warnings, Care)
- s Page 13 (Warranty)
RTA-940TV
P.11 P.11
• FIRST, inside the unit loosen up the middle screws on the fixed hinges G, and
on the doors 12 tighten the screw on the hinges F just a little bit to allow both
pieces of hinges to connect well one to another.
• THEN, install the doors 12 to the side panels 6 and 10 on the unit by
connecting the articulated hinges F to the fixed hinges G, and tightening the
screws on G.
• LASTLY, and to ensure that the doors will close smootly, adjust their alignment
by loosening the indicated screws, aligning the door, then re-tighten the
screws. You might have to play a little bit with the different adjustments.
To adjust the height, loosen
up these screws, align, then
re-tighten
To adjust the depth, loosen up
this screw, align, then re-
tighten
To adjust side-to-side,
loosen up or tighten this
screw.
THEN: Install the doors
LAST: Adjust the doors
(But just a little bit)
Tighten on F
STEP 14
G
OR
Tools (Not included)
FIRST: Adjust these screws
F
Loosen on G
(But just a little bit)