Instructions / Assembly
Table Of Contents
- RTA-940TV Assembly Instructions (REV-2-CMN-8008-0324)
- s Page 1 (main parts list)
- s Page 2 (Layout, hardware)
- s Page 3 (tips)
- s Page 4 (Cam Bolt-Lock tutorial)
- s Page 5 (Steps 1, 2)
- s Page 6 (Steps 3, 4)
- s Page 7 (Steps 5, 6, 7)
- s Page 8 (Steps 8, 9, 10)
- s Page 9 (Step 11)
- s Page 10 (Steps 12, 13)
- s Page 11 (Step 14)
- s Page 12 (Weight limits, Warnings, Care)
- s Page 13 (Warranty)
RTA-940TV
P.6 P.6
• FIRST place the main top panel 11 upside-down and over a large
tablecloth or blanket to protect its finish, and identify its front
edge.
• THEN assemble panels 7 and 9 from step 3 to panel 11 on the
middle with cam locks C, with all the front edges oriented as shown.
With the pieces placed oriented as shown, ensamble the partition
panels 7 and 9 to the shelf 8 with cam locks C as explained in the
TUTORIAL PAGE.
(Front)
(Back)
(Top)
(Back)
(Back)
(Front)
(Front)
(Bottom surface)
(Bottom)
(Top)
(Bottom)
C
C
OR
Tools (Not included)
STEP 3
Hardware
Pcs
2
Cam lock
STEP 4
Hardware
C
OR
Tools (Not included)
Pcs
2
Cam lock
C
Alignment
Alignment
The 4 panels
will be flushed
at the back.
Panels 7 & 9 will
be receded at
the front.
(Front)
(Back)