ROLLING FILE CABINET WITH GLASS TOP MODEL RTA-S06 ASSEMBLY INSTRUCTIONS REV.
RTA-S06 P.1 Do a quick inventory of all the parts and hardware listed below. For Support, assembly questions & Replacement Parts within the 48 Contiguous United States: Please email us at: support@rtaproducts.com 1 Top drawer left x1 panel P.1 Replacement Parts for International Customers & AK-HI-PR orders: RTA Products will replace the part free of charge, while the customer is responsible for shipping costs plus any International local taxes or duties.
RTA-S06 P.2 14 15 Left panel 16 Right panel x1 x1 P.2 17 Back panel Bottom panel x1 18 x1 Top wood panel x1 21 Bottom drawer x1 front wheel L bracket x1 and Nut Support tube �Ø1x2.
P.3 RTA-S06 P.3 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. √ √ • Please read the assembly instructions throughly and follow step by step. • Make sure you understand which hardware will be used on each step. Using the wrong size of screw, bolt or pin might strip the threads or cause damage to the part in which it is being used. • To avoid misalignments, always leave the screws loosely and do not tighten them until all the pieces are positioned correctly.
RTA-S06 P.4 P.4 THE ASSEMBLY STEPS START ON NEXT PAGE CAM BOLT AND CAM LOCK TUTORIAL THE INSTRUCTIONS BELOW ARE NOT ACTUAL ASSEMBLY STEPS This unit uses cam bolts and locks (also known as mini fixes). If you are not familiar with this kind of hardware, the below is a tutorial that explains how to use them on the steps where they are required. 1. Screw the bolt into the indicated hole on the panel indicated in the assembly step. 2. Join the other panel (with the big hole) to the panel with the bolt.
RTA-S06 P.5 P.5 ASSEMBLY STEPS WE RECOMMEND TO PLACE THE PIECES OVER BLANKETS TO PROTECT THEIR FINISH DURING ASSEMBLY. STEP 1 Attach the casters 3 to the bottom surface of panel 16 with screws E as indicated: • The locking casters 3L go at the FRONT of the panel. • The non-locking casters 3N go at the BACK.
RTA-S07 P.6 STEP 3 Assemble the locking system to the right panel 15 by attaching the fittings 23A with screws C as shown. Hardware: C M3x15 P.6 8 Pcs (To p) (23E goes with rods at top) 23E 23C 15 (Front) STEP 4 Grab all the 3 sets of sliders 12 (total 4 pieces) and separate them into 2 groups according to their shape: The "flat" ones will be used on the next step. The "L" shaped won't be used until steps 17 and 24, so set them aside.
RTA-S06 P.7 STEP 5 Hardware: C M3x15 8 Pcs P.7 Assemble the “Flat” sliders 12 to the side panels 14 and 15 with screws C. Please note: • The wheel is at the front, and faces down with 2 holes above it. • The sliders attach at the front on the 2nd hole. • The grooves on the panels are located at the back.
RTA-S06 P.8 STEP 7 P.8 Slide in the back panel 17 through the grooves of panels 14 and 15 and into the groove of panel 16. 17 15 14 16 STEP 8 • Attach bolts A to the bottom surface of the top wood panel 18. • Align cam locks on panels 14 and 15. • Assemble panel 18 to 14 and 15 as explained in page 4. Hardware: A M6x40 Bolt 4 Pcs 18 (Front) Cam locks alignment 15 14 STEP 9 Hardware: G Assemble the support tubes 21 to the discs on the top glass panel 22 with screws G.
RTA-S06 P.9 STEP 10 Assemble the support tubes 21 to the top wood panel 18 with screws H from underneath. Hardware: H M6x35 P.9 4 Pcs (Front) 21 18 C M3x15 4 Pcs Attach the metal fitting 23B to the drawers right panels 2 and 8 respectively with screws C. NOTE: The “U” on the fitting must face DOWN.
RTA-S06 P.10 STEP 12 Hardware: A M6x40 Bolt 4 Pcs For the top drawer, assemble side panels 1 and 2 to the front panel 4 with bolts A. P.10 STEP 13 Slide one of the bottom panels 5 through the grooves of the side panels and into the front panel as shown. 2 5 1 2 Cam locks alignment 1 4 STEP 14 Hardware: B M4x35 4 Pcs Assemble the back panel 6 to the side panels 1 and 2 with screws B. 4 STEP 15 Hardware: D M4x20 2 Pcs Assemble one of the handles 13 to front panel 4 with screws D.
RTA-S06 P.11 STEP 17 Hardware: C M3x15 4 Pcs P.11 Flip the drawer upside-down and assemble the “L” sliders 12 with screws C, making sure the wheel goes towards the back, and that they don’t protrude, otherwise, the drawer raises 1” and won’t fit in the cabinet. When finished, the sliders look like this: 12 (Top) Sliders 12 (Bottom) (Bo (Front) tto m ) 1 (Back) (To p) STEP 18 Hardware: E F M4x14 M6x12 2 Pcs If you install as below, the drawer raises 1" and won't fit in the unit.
RTA-S06 P.12 STEP 20 Slide the bottom panel 5 through the grooves of the side panels and into the front panel as shown. P.12 STEP 21 Hardware: B M4x35 4 Pcs Assemble the back panel 10 to the side panels 7 and 8 with screws B. 10 5 ) om t t o (B 8 p) (To 7 8 7 9 STEP 22 Insert the file tubes 11 through the corresponding hole on panel 10 and screw into panel 9, but DO NOT OVERTIGHTEN to avoid accidental damage humps or perforation.
P.13 RTA-S06 P.13 STEP 25 • Insert the drawers into the cabinet, starting with the bottom then the top. Insert at an angle with their fronts facing down, making sure the wheels from the drawer slide in the middle of the sliders inside the cabinet. If the top drawer does not enter, review the assembly done in steps 5, 17 and 24. • Test the lock on the top drawer: make sure the bottom drawer is completely closed and the rod on the lock is facing DOWN; the key must turn COUNTER-CLOCKWISE.
RTA-S06 P.14 P.14 WEIGHT LIMITS 22 Lbs (10 Kg) 22 Lbs (10 Kg) 22 Lbs (10 Kg) WARNINGS • Do not exceed the indicated weight limits. • Do not expose the surfaces to direct sunlight or to extreme environmental conditions. • Do not use solvents or abrasive materials to clean the unit. • Do not sit on the unit or lean against it. • Do not allow small children to climb over the unit. • Do not allow small children to reach inside the drawers without your supervision.
P.15 RTA-S06 TECHNI MOBILI WARRANTY DESKS/LAPTOP CARTS/FILE CABINETS: LIMITED 5-YEAR WARRANTY RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA Products or its authorized resellers that this product will be free from defects in its workmanship . and materials, under normal use and service conditions, as described herein. "Defects" as used in this warranty, is defined as any imperfections that impair the use of the furniture or product.
