Instructions / Assembly

RTA-S06
P.10 P.10
For the top drawer,
assemble side panels 1
and 2 to the front panel 4
with bolts A.
Slide one of the bottom panels 5 through
the grooves of the side panels and into the
front panel as shown.
STEP 12
Hardware:
A
M6x40
Bolt
4
Pcs
2
1
4
STEP 13
2
4
1
5
Assemble the back panel
6 to the side panels 1 and
2 with screws B.
STEP 14
Hardware:
B
M4x35
4
Pcs
1
6
2
Assemble one of the
handles 13 to front panel 4
with screws D.
13
STEP 15
Hardware:
D
M4x20
2
Pcs
• Assemble the lock 23D to the interior face of the f
ront panel 4 with
screws C, making sure the keys will make the rod rotate from the
bottom to the top in a
counter-clock motion.
• Attach the ring 23G to the lock at the front.
NOTE: If the lock is installed turning the wrong way, the rod might
get stuck with the drawer locked, unable to open it.
STEP 16
Hardware:
C
M3x15
2
Pcs
4
23D
23G
CORRECT:
Bottom to top
in counter-
clock motion.
Cam locks
alignment
INCORRECT:
It might get the
rod stuck and
drawer might
not open.
4