Instructions / Assembly

Table Of Contents

RTA-S06

P.13 P.13

• Insert the drawers into the cabinet, starting with the bottom then the top. Insert at an

angle with their fronts facing down, making sure the wheels from the drawer slide in

the middle of the sliders inside the cabinet. If the top drawer does not enter, review the

assembly done in steps 5, 17 and 24.

• Test the lock on the top drawer: make sure the bottom drawer is completely closed

and the rod on the lock is facing DOWN; the key must turn COUNTER-CLOCKWISE.

If the key turns clockwise, or the drawers don’t lock, review the assembly done in steps

2, 3, 11 and 16 .

STEP 25

Inside the drawer, the rod on the lock

must face DOWN, and the Key must

turn counter-clockwise

Please note that for the drawers will lock only if they are closed flushed.

If the unit does not lock, review the assembly done in steps 2, 3, 5, 11,16, 17 and 24

for the correct assembly of the locking system and the drawer sliders.

If the keys are lost but the cabinet is unlock, replace them with a new set of lock and

keys.

If the cabinet is locked, and the keys are lost or don't want to turn, email Support for

assistance and instructions for solving this problem.

TROUBLESHOOTING THE LOCK SYSTEM