Instructions / Assembly
Table Of Contents
- RTA-S06 Page 0 (Front cover)
- RTA-S06 Page 1 (Main Parts list - 1)
- RTA-S06 Page 2 (Main Parts list - 2)
- RTA-S06 Page 3 (Tips and warnings)
- RTA-S06 Page 4 (Cam Bolt-Lock tutorial)
- RTA-S06 Page 5 (Steps 1, 2)
- RTA-S06 Page 6 (Steps 3, 4)
- RTA-S06 Page 7 (Steps 5, 6)
- RTA-S06 Page 8 (Steps 7, 8, 9)
- RTA-S06 Page 9 (Steps 10, 11)
- RTA-S06 Page 10 (Steps 12, 13, 14, 15, 16)
- RTA-S06 Page 11 (Steps 17, 18, 19)
- RTA-S06 Page 12 (Steps 20, 21, 22, 23, 24)
- RTA-S06 Page 13 (Step 25, Troubleshoot)
- RTA-S06 Page 14 (Weight limits, Warnings, Care)
- RTA-S06 Page 15 (Warranty)
RTA-S06
P.4 P.4
1. Screw the bolt into the indicated hole on the
panel indicated in the assembly step.
CAM BOLT AND CAM LOCK TUTORIAL
THE INSTRUCTIONS BELOW
ARE NOT ACTUAL ASSEMBLY STEPS
This unit uses cam bolts and locks (also known as mini fixes).
If you are not familiar with this kind of hardware, the below is a tutorial
that explains how to use them on the steps where they are required.
2. Join the other panel (with the big hole) to the
panel with the bolt. If it comes with the cam
locks already pre-installed, make sure to align
them to receive the bolt's head (refer to point
3). There might be a very small gap between
the panels which is normal.
3. Insert the cam lock on the panel with the big
hole making sure it goes aligned to receive the
bolt's head.
4. Use a Phillips screwdriver to turn the cam
lock clockwise. This will lock the panels
togheter and also will close any gaps.
Cam lock
alignment
If the cam locks come
pre-in stalled, make sure they
are aligned (see point 3).
THE ASSEMBLY STEPS START ON NEXT PAGE
THIS IS ONLY
A TUTORIAL
THIS IS ONLY
A TUTORIAL
THIS IS ONLY
A TUTORIAL
THIS IS ONLY
A TUTORIAL