Instructions / Assembly
Table Of Contents
- RTA-S06 Page 0 (Front cover)
- RTA-S06 Page 1 (Main Parts list - 1)
- RTA-S06 Page 2 (Main Parts list - 2)
- RTA-S06 Page 3 (Tips and warnings)
- RTA-S06 Page 4 (Cam Bolt-Lock tutorial)
- RTA-S06 Page 5 (Steps 1, 2)
- RTA-S06 Page 6 (Steps 3, 4)
- RTA-S06 Page 7 (Steps 5, 6)
- RTA-S06 Page 8 (Steps 7, 8, 9)
- RTA-S06 Page 9 (Steps 10, 11)
- RTA-S06 Page 10 (Steps 12, 13, 14, 15, 16)
- RTA-S06 Page 11 (Steps 17, 18, 19)
- RTA-S06 Page 12 (Steps 20, 21, 22, 23, 24)
- RTA-S06 Page 13 (Step 25, Troubleshoot)
- RTA-S06 Page 14 (Weight limits, Warnings, Care)
- RTA-S06 Page 15 (Warranty)
RTA-S06
P.7 P.7
• Attach the bolts A to panels 14 and 15 into the indicated holes.
• Check and make sure the cam locks on panel 16 are aligned and
ready to receive the bolts, just as explained in page 4.
• Join panels 14 and 15 to panel 16 and turn the cam locks.
(Top)
(Front)
(Front)
(Back)
STEP 6
Hardware:
A
M6x40
Bolt
4
Pcs
15
14
16
Cam locks
alignment on 1
6:
FIRST:
THEN:
Assemble the “Flat” sliders 12 to the side panels 14 and 15 with screws
C. Please note:
• The wheel is at the front, and faces down with 2 holes above it.
• The sliders attach at the front on the 2nd hole.
• The grooves on the panels are located at the back.
STEP 5
Hardware:
C
M3x15
8
Pcs
14
12
15
(Top)
(Back)
(Front)
The groove goes at
the back of panels
2nd hole from front
(Front)
Wheel at front,
2 holes above it
(Back)
(Front)
(Back)
14
15
(Top)