GAMING CHAIRS MODELS TS70, TSF71 ASSEMBLY INSTRUCTIONS Thank you for purchasing our product. REV.
Models: TS70, TSF71 P.2 P.2 MAIN PARTS LIST A B Backrest x1 F Seat x1 G-L Casters x1 x5 Left armrest C 5-Leg star x1 base G-R x1 Right armrest D Mechanism x1 H Covers for I-L Left cover for X1 Set gas lift x1 seat bracket (SITTING ON CHAIR, NOT LOOKING AT IT) I-R Right cover for J-N Neck pillow x1 seat bracket J-L Lumbar pillow x1 x1 FOR TS70 ONLY LIST OF HARDWARE PART QTY ITEM USE FOR K 1 Allen wrench Steps 2 to 5 16 M8x20mm Mechanism, armrests, backrest.
P.3 Models: TS70, TSF71 P.3 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. βΆ Do a quick inventory to make sure the package contains all the parts and hardware listed in the assembly instructions. β» Make sure you understand which hardware will be used on each step. Using the wrong size of screw, bolt or pin might strip the threads or cause damage to the part in which it is being used. β· Missing, damaged and defective parts can be replaced at no cost to you.
Models: TS70, TSF71 P.4 P.4 ASSEMBLY STEPS STEP 1 Insert the casters F into the legs of the base C using pressure, then place the gas lift E in the middle of the base and cover it with H. π
π
π
π
STEP 2 Hardware K L M8x20mm 4 Pcs Flip over the seat B with its back end towards you, and use screws L to assemble the mechanism D with its handle facing to the LEFT as shown. FRONT π
π
π
STEP 3 Assemble the armrests G to the seat B in their respective sides using screws L.
Models: TS70, TSF71 P.5 STEP 4 P.5 Put the seat over the base parts making sure the tip of the gas lift E enters into the hole of the mechanism D. (Front) π
π
STEP 5 Hardware K L M M8x20mm M5x8mm 4 Pcs Assemble the backrest A to the brackets on the seat B using screws L, then attach the covers I on their respective sides using screws M.
Models: TS70, TSF71 P.6 P.6 CHAIRβS FUNCTIONS β Chairsβ height: Pull UP the lever under the seat. The chair goes down while sitting on it, or up if you lift your body. β‘ Seat tilting: Pull the same lever OUT horizontally to unlock this function, and IN to lock again. NOTE: Unlike regular office chairs, this racing/gaming chair has its base components off-center, and the tilting wonβt be much and might actually feel hard to tilt.
P.7 Models: TS70, TSF71 P.7 TECHNI SPORT WARRANTY Gaming Chair: 2-YEAR WARRANTY Gaming Desk: 5-YEAR WARRANTY Gaming Chair Metal Frame: LIFETIME WARRANTY RTA Products, LLC has warranted the Techni Sport products to the original purchaser who acquired a new product from RTA Products or its authorized re-sellers of the product against defects in material or workmanship.
P.8 Models: TS70, TSF71 P.8 FOR SEVERAL HELP OPTIONS INCLUDING REPLACEMENT PARTS ORDERS _________________________________________________________________ VISIT: WWW.TECHNISPORTUSA.COM CLICK ON SUPPORT TAB Scan QR Code to order replacement parts OR EMAIL US: SUPPORT@RTAPRODUCTS.