User's Manual

EISA Configuration

Checksum Error

PLEASE RUN EISA

CONFIGURATION UTILITY

The EISA non-volatile RAM checksum is incorrect or

cannot correctly read the EISA slot. This can indicate

either the EISA non-volatile memory has become corrupt

or the slot has been configured incorrectly. Also be sure

the card is installed firmly in the slot.

EISA Configuration Is Not

Complete

PLEASE RUN EISA

CONFIGURATION UTILITY

The slot configuration information stored in the EISA

non-volatile memory is incomplete.

Note: When either of these errors appear, the system will

boot

in ISA mode,which allows you to run the EISA

Configuration Utility.

ERROR ENCOUNTERED

INITIALIZING HARD DRIVE

Hard drive cannot be initialized. Be sure the adapter is

installed correctly and all cables are correctly and firmly

attached. Also be sure the correct hard drive type is

selected in Setup.