User's Manual

10
printer connector on the back side of the case.
Step14: Connects the ATX power supply connectors into the motherboard
power connector at Power1 & CN6 separately, please make sure the
direction is correct.
Step15: Installing the COM1 cable between the motherboard and back panel
of the case. Inserting the 9 pins flat cable into the motherboard
connector J9 (COM1), Pin 1 away from the EISA slot (Riser card)
side and mounting the other side of this cable on the COM1 hole of
the back panel of the case by screw in the 2 screws.
Step16: Installing the COM2 cable between the motherboard and back panel
of the case. Inserting the 9 pins flat cable into the motherboard
connector J5 (COM2) Pin 1 away from the EISA slot (Riser card)
side and mounting the other side of this cable on the COM2 hole of
the back panel of the case by screw in the 2 screws.
Remark: Installing the COM3 & COM 4 cable , if you have ordered
the unit with COM 3 & 4 option , COM 3 at J12 connector and COM
4 at J10 connector with the same pin 1 direction as COM 1 & 2 on
the motherboard.
Step17: Installing the back slot window mounting bracket by screw in the 3
screws on the back panel of the case.
Step18: Installing the PCI/AGP Riser card ( MF-845GE ) or PCI only riser
card ( MF-845GV ) into the motherboard at the slot location EISAS1
and mounting this Riser card on the supporting bracket of the case by
screw in the 2 screws which located on the upper two sides of the
Riser card.
Step19: Installing I/O cards on your Mini Desk Top PC, if necessary. The
Mini Desk Top PC has the ability to install 3 I/O cards ( 2 PCI + 1
AGP ) for MFIII-845GE , 4 I/O cards ( 4 PCI ) for MFIII-845GV , 2
I/O cards ( 1 PCI + 1 AGP ) for MFII-845GE , 2 I/O cards ( 2 PCI )
for MFII-845GV. You can install any I/O card simply by taking the
card horizontally and insert the gold finger inside the riser card, then
screw in the card metal plate on the back slot windows mounting
bracket tightly.
Step20: Connecting all the necessary cables. They could be the following
items:
a. Connects the power connector of the CPU cooling fan to the
motherboard at J6 ( CPU FAN ) connector.
b. Connects the front bezel power LED cable (Green and Black
colors) to the connector PWRLED of the motherboard.