User's Manual

25
Setup :The system will boot; but the access to Setup will be denied if the
incorrect password is not entered at the prompt.
APIC Mode
This item allows you to enable APIC (Advanced Programmabed Interrupt
Controller) functionality. APIC is an Intel chip that provides symmetric
multiprocessing (SMP) for its Pentium systems. The default is Disabled.
Options : Enabled , Disabled.
MPS Version Control For OS
Specifies the Multiprocessor Specification (MPS). Version 1.4 supports multiple
PCI bus configurations by incorporating extended bus definition. Enable this for
Windows NT or Linux. For older operating systems, select Version 1.1 The
default is 1.4.
Options : 1.1,1.4.
OS Select for DRAM > 64MB
Some operating systems require special handing. Use this option only if your
system has greater than 64 MB of memory. The default is Non-OS2.
OS2 : Select this if you are running the OS/2 operating system with greater than
64 MB of RAM.
Non-OS2 : Select this for all other operating systems and configurations.
Report No FDD For WIN 95
If you are running a system with no floppy drive and using Windows 95 ,select
Yes for this item to ensure compatibility with the Windows 95 logo certification.
Otherwise, select NO.
Yes : The system has no floppy drive and you are using Windows 95.
No :The system has an operating system other than Windows 95.
Small Logo (EPA) Show
This field enables the showing of the EPA logo located at the upper right of the
screen during boot up.
6.5 Advanced Chipset Features
This Setup menu controls the configuration of the chipset.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Timing Selectable By SPD ITEM HELP