User's Manual

3
6
Soft-off by PWR-BTTN
Use this to select your soft-off function. The default is Instant Off.
Instant Off: Turns off the system instantly.
Delay 4 Second:Turns off the system after a 4 second delay. If momentary press
of button, the system will go into Suspend Mode. Press the
power button again to make system back to work.
CPU THRM-Throttling
This item sets the percentage of time that the CPU is idled if CPU throttling is
initiated by excess heat. The default setting is 50%.
Options:12.5%,25.0%,37.5%,50.0%,62.5%,75.0%,87.5%.
Wake-Up by PCI card
An input signal from PME on the PCI card awakens the system from a soft off
state.
Options: Enabled , Disabled.
Power On by Ring
When enabled , any modem or LAN activity awakens the system from power
savings mode.
Options: Enabled , Disabled.
USB KB Wake-Up From S3
When enabled , any USB activity awakens the system from power savings mode.
Options: Enabled , Disabled.
Resume by Alarm
When enabled , you can set the date and time in the following two fields. Any
event occurring at the specified date or time awakens the system from power
savings mode.
** Reload Global Timer Events**
Primary/Secondary IDE 0/1
Any activity occurring on these channels awakens the system from power savings
mode.
FDD , COM ,LPT Port