User's Manual

37
When enabled , any event occurring on these ports awakens the system from
power savings mode.
PCI PIRQ[A-D]#
When enabled , any event occurring on these PCI slots awakens the system from
power savings mode.
6.8 PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the system use
INT#, thus all installed PCI cards must be set to this value.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Reset Configuration Data
Disabled ITEM HELP
Resources Controlled By
Auto [ESCD]
IRQ Resources
Press Enter
PCI/VGA Palette Snoop
Disabled
Reset Configuration Data
This setting allows you to clear ESCD data. The default is Disabled.
Disabled: Normal Setting.
Enabled: If you have plugged in some Legacy cards to the system and they were
recorded into ESCD (Extended System Configuration Data), you can
set this field to Enabled in order to clear ESCD.
Resources Controlled by
Determines what controls system PNP/PCI resources. The default is Auto (ESCD).
Manual: PNP Cardʺs resources are controlled manually. The ʵIRQ Resourcesʵ
field becomes available and you can set which IRQ-X and DMA-X are
assigned to PCI/ISA PNP or Legacy ISA Cards.
Auto: If your ISA card and PCI cards are all PNP cards , BIOS assigns the
interrupt resource automatically.
PCI/VGA Palette Snoop