User's Manual
41
User password: authorized to enter, but not authorized to change the
options of the setup menus.
When you select Set User/Supervisor Password, the following message appears
prompting you to type a password:
ENTER PASSWORD:
Type the password , up to eight characters in length , and press <Enter>. The
password typed now clears any previously entered password from CMOS memory.
You will be prompted to confirm the password. Type the password and press
<Enter>. You may also press <ESC> to abort the selection and not enter a
password.
To disabled a password , press <Enter> when you are prompted to enter the
password. A message will confirm the password is disabled:
PASSWORD DISABLED.
Once the password is disabled , the system will boot and you can enter Setup
freely. When a password has been enabled, you will be prompted to enter it every
time you try to enter Setup. This prevents an unauthorized person from changing
any part of your system configuration.
Additionally, when a password is enabled , you can also require the BIOS to
request a password every time your system is rebooted. This prevents unauthorized
use of your computer.
You determine when the password is required within the BIOS Features Setup
menu ʵ˦˸˶˼ʵʳ˼ˁʳ˜˹ʳ˻˸ʳ˦˸˶˼ʳ˼ʳ˼ʳ˸ʳʳʵ˦˸ʵʿʳ˻˸ʳ˴˷ʳ˼˿˿ʳ˵˸ʳ
˸˼˸˷ʳ ˵˻ʳ˴ʳ ˵ʳ ˴˷ʳ ˴ʳ ˸ʳ ʳ ˦˸ˁʳ ˜˹ʳ ˸ʳ ʳ ʵ˦˸ʵʿʳ ˼˺ʳ ˿ʳ ˶˶ʳ
˻˸ʳ˼˺ʳʳ˸˸ʳ˦˸ˁʳ
6.14 Save & Exit Setup
This option allows you to determine whether or not to accept the modifications. If
you type “Y”, you will quit the setup utility and save all changes into the CMOS
memory. If you type “N”, you will return to Setup utility.
6.15 Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Save to CMOS and EXIT (Y/N) ? Y
Pressing ʵˬʵʳ ˸ʳ ˻˸ʳ ˸˿˸˶˼ʳ ˴˷˸ʳ ˼ʳ ˻˸ʳ ˸ʳ ˼ʳ ˖ˠˢ˦ˀ˴ʳ ˸˶˼˴˿ʳ ˸˶˼ʳ ˹ʳ
˸ʳ ˻˴ʳ ˴ʳ ʳ ˴˹˸ʳ ʳ ʳ ʳ ˸ʳ ˹˹ˁʳ ˧˻˸ʳ ˸ʳ ˼˸ʳ ʳ ˵ʳ ʳ
˶˸ʿʳ˻˸ʳ˕˜ˢ˦ʳ˶˹˼˺˸ʳʳ˸ʳ˴˶˶˷˼˺ʳʳ˻˸ʳ˦˸ʳ˸˿˸˶ˀ˼ʳ˸˷ʳ˼ʳ
˖ˠˢ˦ˁʳ˔˹˸ʳ˴˼˺ʳ˻˸ʳ˴˿˸ʳ˻˸ʳ˸ʳ˼ʳ˸˴˸˷ʳ˴˺˴˼ˁ