Technical Pro Professional Hybrid Amplifier with USB & SD Card Inputs ® Bluetooth Compatibility User Manual for: H1502UrBT & H2502UrBT & H3502UrBT
Hybrid Series WARNING! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE ARE NOUSER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
Hybrid Series Hybrid Series Front Panel 3 4 5 6 7 8 9 10 11 1 2 16 17 18 19 20 12 13 14 21 22 15 23 24 1.Power:Press this button to power the unit on and off. 2.MP3(1/8”) Input: Connect your MP3 player or computer here.Make sure to press the input selector button (5) until “MP3” appears on the display screen to play the signal from the MP3 player or computer. 3.
Hybrid Series 5.Input Selector: Use this button to switch between all the inputs. 6.Audio Function: Use this to switch among treble, bass, balance & master volume control mode, then use the master volume knob to adjust the corresponding sound effect. 7.Previous Track Button: Press this button to go back to the beginning of the previous track on either the iPod™ (Classic and Nano), USB flash drive,SD Card or bluetooth.
Hybrid Series Hybrid Series Rear Panel 11 10 9 8 7 6 1.Power Supply: Only use the power cord provided with the unit to power the unit. When connecting and disconnecting the power cord, be sure the power of the unit is off. Connect the cord to the rear of the unit and then connect it to the outlet. 2.Voltage selector: Select between 230V AC 50Hz / 115V AC 65Hz. When using with a 115V outlet, the unit should be set to 115V. 3.Surround Speakers: Connect your surround speakers to these speaker outputs.
Hybrid Series Hybrid Series Remote 1 3 2 4 5 6 7 8 9 10 12 13 15 11 14 16 17 18 19 20 21 22 23 1.Play/Pause:Press this button to pause the signal from the USB flash drive,SD Card or iPod™(Classic and Nano) or bluetooth signals,press again to play. This button will only function for the USB flash drive,SD Card, iPod™ (Classic and Nano) or bluetooth signals. 2.Stop:Press this button to pause the signal from the USB flash drive,SD Card or iPod™(Classic and Nano) signals, press again to play.
Hybrid Series 10.Balance Control: Press these buttons to adjust the balance effect of master output. 11.Bass Control: Press either of these buttons to increase or decrease the bass effects on the main output. 12.EQ Mode Selector: The hybrid has five built-in pre-set equalization modes. Press this button to switch among the pre-set equalization modes. 13.P.Call: Press this button to switch entry functions in tuner mode. Press this button the first time, and then press the number keys to enter the frequency.
Hybrid Series “REC” and the elapsed time displayed on the screen will start flashing. Press again to continue the recording. Press and hold this button for several seconds to save the file and end the recording and exit. If both USB flash drive and SD card are connected, the unit will begin recording onto the USB flash drive. If the USB flash drive is full, remove it and then press the record button again to start another recording.
Hybrid Series Typical Hybrid Series Input and Output Connections POWERED SUBWOOFER Wall Socket Amplifier TAPE RECORDER iPhone™ (Bluetooth enabled) (AUDIO INPUT) CD Player In the typical setup, a user should wire from the output of the signal source directly to one of the RCA inputs on the rear of the hybrid. Once the input signal source is connected to the hybrid, connect the speakers to the hybrid’s main outputs. Pictured above is an iPhone™ and DVD player connected to the hybrid inputs.
Hybrid Series Connecting the speaker wire to the hybrid’s main speaker outputs 1.Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker cable and twist the exposed wires of the cable together to prevent short circuits. 10 mm (0.4 in) 2.Unscrew the main speaker output terminal on the rear of the Hybrid.Insert the exposed speaker wire into the opening. 3.Tighten the knob. Connecting the speaker wire to the hybrid surround speaker outputs 1.Remove approximately 10 mm (0.
Hybrid Series USB Flash Drive & SD Card & iPod™(Classic and Nano) & Bluetooth Connection MP3 Player There are also SD Card and USB flash drive inputs on the front panel of the hybrid which is compatible with iPod™ (Classic and Nano) via the USB input. The maximum size of the SD Card or USB flash drive is 32GB. If your memory card exceeds 32GB, the unit will not be able to read the files from the memory cards. You will only be able to play .mp3, .wav, .
Hybrid Series AC Power Cord Connection To connect the power cord to your hybrid simply plug female side of the power cord into the power cord input which is on the rear of the unit. Then plug the male side of the power cord to an electric outlet. The AC power cords supplied purposefully have 2 blades and one grounding prong.
Hybrid Series Screen Display This will display when the unit is reading the USB flash drive. This will display when pressing the “Previous” button or key. This will display when the unit is reading the SD card. This will display when pressing the “Next” button or key. This will display when the input selected is MP3. This will display when the volume level is set to 31. This will display when the unit is playing tracks from USB flash drive or SD card.The track No.
