RX38Ur 1000 Watts Technical Pro Professional Receiver with USB & SD Card Inputs Compatible with iPod™ User Manual for: RX38Ur
RX38Ur WARNING! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE ARE NOUSER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
RX38Ur RX38Ur Front Panel 2 3 4 5 6 7 8 9 10 11 12 RX38Ur 1000 Watts 1 17 18 19 20 21 22 23 24 13 15 16 14 1.Power:Press this button to power the unit on and off. 2.TUNING:Use this knob to manually scan through the FM stations. The input must be set to TUNER in order to play the signal from the tuner. 3.TUNER:Press this button to select the FM input. 4.DVD:Press this button to select the DVD input. Once pressed the unit will play whatever signal is connected to the DVD input. 5.
RX38Ur 8.Previous Button: Press this button to go back to the beginning of the previous track on either the USB flash drive,SD card or iPod™(Classic and Nano). 9.Next Button: Press this button to go to the beginning of the next track on either the USB flash drive, SD card or iPod™(Classic and Nano). 10.REPEAT / RANDOM: Press this button to repeat the current track, all tracks or play random tracks on the USB flash drive,SD card or iPod™(Classic and Nano) inputs.
RX38Ur RX38Ur Rear Panel This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. SUBOUT Model: RX38Ur Sub1 Sub2 SUBOUT NOTE:SURROUND ONLY WORKS WHEN ALL SURROUND SPEAKERS ARE CONNECTED. 9 8 7 6 5 4 3 2 1 1.
RX38Ur RX38Ur Remote 1.Input Selector: Use this button to switch between the inputs. 2.EQ Mode Selector:The RX38Ur has four built-in pre-set equalization modes. Press this button to switch between the pre-set equalization modes. 3.Number Keys: The number keys are used to input the track number. For 3 example if you press 6-4-3 then ENTER the unit will go to track number 643 on either the USB flash drive,SD Card or iPod™(Classic and Nano).
RX38Ur Typical RX38Ur Input and Output Connections POWERED SUBWOOFER Wall Socket This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Model: RX38Ur SUBOUT Sub1 Sub2 SUBOUT NOTE:SURROUND ONLY WORKS WHEN ALL SURROUND SPEAKERS ARE CONNECTED.
RX38Ur Connecting the speaker wire to the RX38Ur’s main speaker outputs 1.Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker cable and twist the exposed wires of the cable together to prevent short circuits. 10 mm (0.4 in) 2.Unscrew the main speaker output terminal on the rear of the RX38Ur.Insert the exposed speaker wire into the opening. 3.Tighten the knob. Connecting the speaker wire to the RX38Ur surround speaker outputs 1.Remove approximately 10 mm (0.
RX38Ur USB Flash Drive & SD Card & iPod™(Classic and Nano) RX38Ur 1000 Watts MP3 Player There are also SD Card and USB flash drive inputs on the front panel of the RX38Ur which is compatible with iPod™ (Classic and Nano) via the USB input. The maximum size of the SD Card or USB flash drive is 32GB. If your memory card exceeds 32GB, the unit will not be able to read the files from the memory cards. You will only be able to play .mp3, .wav, .
RX38Ur AC Power Cord Connection To connect the power cord to your RX38Ur simply plug female side of the power cord into the power cord input which is on the rear of the RX38Ur. Then plug the male side of the power cord to an electric outlet.The AC power cords supplied purposefully have 2 blades and one grounding prong. If your outlet is not equipped to handle this type of plug,do not attempt to forcefully plug this AC power cord into the outlet, and do not alter the plug so that it can fit in the outlet.
RX38Ur Connecting the RX38Ur to Passive Loudspeakers The RX38Ur is designed to power up to two full-range passive loudspeakers and three surround speakers. The speakers should be connected via the speaker wire outputs on the rear of the RX38Ur. NOTE: WHEN MAKING THESE CONNECTIONS THE POWER OF THE RX38Ur AND THE SIGNAL SOURCE SHOULD ALL BE IN THE OFF POSITION WITH THE VOLUME LEVELS TURNED DOWN.ONCE THE UNITS ARE ALL POWERED ON, SLOWLY INCREASE THE VOLUME TO AVOID DAMAGING ANY OF YOUR EQUIPMENT.