User's Manual

DRAFT

Amendment to page 159: “WIRELESS” section of APPENDIX 4

WIRELESS

Create a wireless connection between your wireless router

and your DIRECTV HD DVR, so your receiver can access

the Internet.

For DIRECTV

Receivers up to an including the HR34,

follow the instructions below.

For the HR44 Advanced Whole Home HD DVR, which has

an integral wireless transceiver, see the section entitled

“WIRELESS – HR44”.

PAGE 1
Amendment to page 159: “WIRELESS” section of APPENDIX 4 WIRELESS Create a wireless connection between your wireless router and your DIRECTV HD DVR, so your receiver can access the Internet. FT For DIRECTV® Receivers up to an including the HR34, follow the instructions below. D R A For the HR44 Advanced Whole Home HD DVR, which has an integral wireless transceiver, see the section entitled “WIRELESS – HR44”.
PAGE 2
Additional section for APPENDIX 4 HR44 WIRELESS – HR44 FT Connecting your HR44 to your wireless network Starting from a TV picture, press MENU on your RC71 remote control. Warranty VOID if Broken or Removed The HR44 Advanced Whole Home HD DVR has an integral wireless transceiver. You can therefore pair it with your existing wireless router, so that it is connected wirelessly to your existing broadband service to allow Video-on-Demand, callback service etc. It is used primarily for data transfer.
PAGE 3
Additional section for APPENDIX 4 (cont.) If your WiFi router is suitable, you can connect using Push Button Setup (WPS); otherwise you can use Manual Setup, as described below. Manual Setup Select Manual Setup. FT Your HR44 searches for wireless networks and lists them on the screen (this can take a minute or two). Use the arrow buttons to move the blue dot to be next to the wireless network you want, then press SELECT. A Use the right arrow button to highlight Continue, then press SELECT.