User's Manual

The Menu System
61
The Dish Pointing Menu Screen
Follow these steps to obtain your dish pointing coordinates:
1. Turn on your television and satellite receiver.
2. Tune your television to the satellite receiver’s output channel.
3. Press MENU on the remote to bring up the Main menu.
4. Use the arrows to highlight the “Dish Pointing” option, and then
press OK to access the dish pointing screen.
NOTE: The menu screen that you see may be slightly different from
the one pictured here.
5. Use the arrows on the remote or the front panel to highlight “Zip
Code” and then press OK.
6. Enter the zip code for the dish installation location.
7. Record the elevation and azimuth numbers below.
Elevation _____________ Azimuth ___________
Elevation is the up/
down angle that the
dish is pointed.
Azimuth is side to
side direction that
the dish is pointed.
You only need to use one of the available
methods to find your dish pointing
coordinates. If you know the zip code for
the locality where the dish is being
installed, use that.