User's Manual

The Menu System

Home Control

Home Control lets you remotely control several lamps and appliances

through your receiver.

Home Control Setup

The Home Control Data Interface connects to the HOME CONTROL jack

on the back of the receiver. Once connected, you must tell the receiver

to use this port for Home Control.

1. Press OK to bring up the Main menu.

2. Point to and select Options.

3. Point to and select System Options.

4. Point to and select Data Port and choose Home Control as the

default setting.

Device Setup

1. From the Main menu select Home Control.

Home Control can control several devices.

2. Select a device you would like to control.

3. Complete the on-screen sentence using the arrow buttons and OK.

Press OK to scroll through the lists of appliances and locations.

To use control devices, you must connect a

Home Control Data Interface to the

receiver and a remote module to the

device you want to control. The Home

Control Data Interface connects to the

HOME CONTROL jack on the back of the

receiver.

Once connected, you must tell the

receiver to use this port for Home Control.

These devices are available as accessories

sold through your digital satellite dealer

or the accessories order form at the back

of this book.

HOME CONTROL