an ou d N Fo ts O r A id T PP e fo R T rd O ec i V hn str AL ic ib ol ut or io !!! n DWA1230 Quick Setup Guide
1. Before you start Carefully read the Safety Instructions and Regulatory Notices document included in your package before continuing with the installation of your DWA1230. 2.
. Connect the DWA1230 to the Broadband service DSL2 an ou d N Fo ts O r A id T PP e fo R T rd O ec i V hn str AL ic ib ol ut or io !!! n DSL1 1 Take both DSL cables. 2 Plug one DSL cable into the DSL 1 port and plug the other one in the DSL2 port. 3 Plug the other end of both DSL cables into your telephone wall sockets. 4. Power on the DWA1230 Power On/Off 1 Plug the connector of the electric power supply adapter into the Power port. Plug the adapter into a nearby power outlet.
5. Connect your network devices We recommended you to first connect one computer/tablet (if possible via a wired connection), then complete the rest of the procedure and as a final step connect the other (wired and/or wireless) devices. an ou d N Fo ts O r A id T PP e fo R T rd O ec i V hn str AL ic ib ol ut or io !!! n 5.1. Connect your wired (Ethernet) devices LAN If you want to connect a device using a wired (Ethernet) connection: 1 Take the Ethernet cable with the yellow connectors.
.2. Connect your wireless devices Connection procedure You can connect to an access point: • Automatically using WPS: an ou d N Fo ts O r A id T PP e fo R T rd O ec i V hn str AL ic ib ol ut or io !!! n Network Name WPS Network Name 1 Start WPS Push Button Configuration (PBC) on your wireless device. 2 If your wireless device prompts you to select your access point from a list, select the item that uses the Network Name printed on the DWA1230 settings card or on the bottom label of your DWA1230.
5.3. Connect your DWA1230 to your MoCA network an ou d N Fo ts O r A id T PP e fo R T rd O ec i V hn str AL ic ib ol ut or io !!! n MoCA allows you to interconnect your local MoCA devices (for example, your settop box) via your coax network. MoCA Proceed as follows: 1 Take a coaxial cable. 2 Connect one end of the coaxial cable to the MOCA port on the back of the DWA1230. 3 Connect the other end of the coaxial cable to the coaxial wall jack or splitter. 6.
. Configure your DWA1230 to your needs (optional) an ou d N Fo ts O r A id T PP e fo R T rd O ec i V hn str AL ic ib ol ut or io !!! n If you want to make additional changes to the default settings (for example, you want to change the wireless security settings) of your DWA1230, proceed as follows: 1 Make sure that you have the following information at hand: Admin Settings address Admin User Name Admin Password You can find this information on the DWA1230 settings card that is included in your b
an ou d N Fo ts O r A id T PP e fo R T rd O ec i V hn str AL ic ib ol ut or io !!! n *DSL37756460* DSL37756460 TECHNICOLOR 1-5, rue Jeanne d’Arc 92130 Issy-les-Moulineaux France www.technicolor.com Copyright 2017 Technicolor. All rights reserved. DMS3-QIG-25-477 v1.0. All tradenames referenced are service marks, trademarks, or registered trademarks of their respective companies. Specifications subject to change without notice.
