Installation Guide
Table Of Contents
- Audience
- Typographic Conventions
- Overview
- Installation Tools
- Installing the Security System
- Step A: Setting up the Router
- Step B: Installing the Technicolor TouchScreen
- Step C: Ensure Your TouchScreen Configuration Information Is Correct
- Step D: Activating the System
- Step E: Adding Sensors to the Security System
- Step F: Testing the Alarm Functionality of the Security System
- Step G: Setting and Validating the Security Information
- Step H: Mounting the Sensors
- Step I: Configuring the TouchScreen
- Step J: Activating the Subscriber Portal
Installing the Security System
15
3. Tap Next.
The TouchScreen locates all the available wireless routers in range, and displays their MAC
address.
Figure 8: Activation: Setting Up for Wi-Fi Screen
Figure 9: Activation: Router Located Screen
4. Check the MAC address for the router/modem to which the TouchScreen must connect (usually
located at the back of the device).
5. Tap the MAC address for the correct router.
6. Tap Next.
The Configuring and Securing the Router screen is displayed as the TouchScreen establishes a
firm connection with the router/modem, the Broadband servers, and the Cellular connectivity
servers.