Installation Guide Part 2
Table Of Contents
- Technician Operations
- Getting Started
- Testing Alarms
- Configuring the Entry/Exit Delay Periods
- Configuring the Alarm Transmission Delay
- Configuring the Swinger Shutdown Feature
- Resetting the TouchScreen to Factory Defaults
- Checking for New Firmware Updates for the TouchScreen
- Enabling Fire Alarm Verification
- Managing the Physical Devices in the Security System
- Managing Sensors & Zones
- Appendix A: General Concepts of the Security System
- Appendix B: TouchScreen Placement Options
- Appendix C: General Info for Sensor Placement
- Appendix D: Installer Quick Reference (SIA)
60
2. Ensure each sensor to be added to the TouchScreen is in Search mode.
See the sensor installation documentation for how to tell if a sensor is in Search mode, it is not in
Search mode, and how to restart Search mode if it is not.
3. Tap Next.
A Stop button is displayed on the Locating Wireless Sensors screen. The TouchScreen searches for
sensors that are available to be added. As sensors are found, a grayed icon is displayed for that
sensor.
4. Fault each found sensor to pair it to the TouchScreen.
For example, for Door/Window sensors, separate the magnet and reed switch to mimic a door
being opened.
As sensors are found, a grayed icon is displayed for that sensor.
Home System Installation Guide