Installation Guide Part 2
Table Of Contents
- Technician Operations
- Getting Started
- Testing Alarms
- Configuring the Entry/Exit Delay Periods
- Configuring the Alarm Transmission Delay
- Configuring the Swinger Shutdown Feature
- Resetting the TouchScreen to Factory Defaults
- Checking for New Firmware Updates for the TouchScreen
- Enabling Fire Alarm Verification
- Managing the Physical Devices in the Security System
- Managing Sensors & Zones
- Appendix A: General Concepts of the Security System
- Appendix B: TouchScreen Placement Options
- Appendix C: General Info for Sensor Placement
- Appendix D: Installer Quick Reference (SIA)
Managing Sensors & Zones
69
3. Tap a sensor/security zone listed in the First Zone column.
4. Tap a different sensor/security listed in the Second Zone column.
5. In the Cross Zone Timeout field, tap the arrows to set the number of seconds that the system will
wait after ONE of the sensors is faulted to see if the OTHER sensor is faulted.
6. Tap Save to create the cross-zone association.
To delete a cross-zone association for two sensors:
1.
From the Installer Settings Menu, tap Sensors & Zones ® Cross Zone Association.
The Cross Zone Associations screen is displayed listing each cross-zone association.