Installation Guide Part 2
Table Of Contents
- Technician Operations
- Getting Started
- Testing Alarms
- Configuring the Entry/Exit Delay Periods
- Configuring the Alarm Transmission Delay
- Configuring the Swinger Shutdown Feature
- Resetting the TouchScreen to Factory Defaults
- Checking for New Firmware Updates for the TouchScreen
- Enabling Fire Alarm Verification
- Managing the Physical Devices in the Security System
- Managing Sensors & Zones
- Appendix A: General Concepts of the Security System
- Appendix B: TouchScreen Placement Options
- Appendix C: General Info for Sensor Placement
- Appendix D: Installer Quick Reference (SIA)
72
11. Tap the type of router the TouchScreen will use and tap Next.
The Connectivity Setup screen displays options for connecting to the router/modem.
The following options are displayed:
Router — Connect to the router/modem wirelessly)
Ethernet with Router — Connect to the router/modem using an IEEE 802.3 Ethernet cable
12. Tap the method for the TouchScreen to connect to the router/modem and tap Next.
If Router was selected, the Router Connection Checklist is displayed.
If Ethernet with Router was selected, the Ethernet Connection Checklist is displayed.
Home System Installation Guide