Installation Guide Part 2
Table Of Contents
- Technician Operations
- Getting Started
- Testing Alarms
- Configuring the Entry/Exit Delay Periods
- Configuring the Alarm Transmission Delay
- Configuring the Swinger Shutdown Feature
- Resetting the TouchScreen to Factory Defaults
- Checking for New Firmware Updates for the TouchScreen
- Enabling Fire Alarm Verification
- Managing the Physical Devices in the Security System
- Managing Sensors & Zones
- Appendix A: General Concepts of the Security System
- Appendix B: TouchScreen Placement Options
- Appendix C: General Info for Sensor Placement
- Appendix D: Installer Quick Reference (SIA)
78
After the Alarm Transmission Delay period is completed, the customer still has 5 minutes (the Cancel
Window) to disarm the system. If the customer does this during the Cancel Window and central
monitoring has not contacted her, central monitoring is automatically notified that the customer has
cancelled the alarm.
The Duress Code
The Duress keypad code is used if an intruder forces the customer to disarm her system or access her
security settings. Rather than entering her keypad code, she enters the Duress keypad code. When she
does this, she is granted full access to her TouchScreen, but a silent alarm is immediately sent to the
central monitoring station and police are dispatched. The Duress Code is enabled and configured from
the Manage Keypad Codes screen accessible from the Settings Widget.
Home System Installation Guide