User's Guide
Table Of Contents
- Compliances
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Managing Sensors
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- View Your Security Account Information
- Maintaining & Configuring the TouchScreen Device
- Appendix 1: TouchScreen Installation and Maintenance
- Appendix D: Quick Reference Tables
Managing Your System Security
25
To disarm the system from the TouchScreen, see page 25.
To disarm the system from the Subscriber Portal, see page 25.
To disarm the system from the TouchScreen:
1. Tap the Security Status header when it is in Armed state.
The Security app is displayed with a keypad and the Disarm System tab active. If the sensor that
was tripped is associated with a camera, the view from that camera is displayed. If the sensor is
not associated with a camera, the view from the default camera is displayed.
2. Enter your security code.
If the alarm was triggered, the camera view and alarm history are displayed.
To disarm the system remotely from the Subscriber Portal:
1. Click the Security Status header when it is in Armed state.