User's Guide
Table Of Contents
- Compliances
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Managing Sensors
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- View Your Security Account Information
- Maintaining & Configuring the TouchScreen Device
- Appendix 1: TouchScreen Installation and Maintenance
- Appendix D: Quick Reference Tables
Managing Your System Security
29
To manually trip an alarm:
1. Press the Panic button on the lower front of the TouchScreen.
The Emergency screen is displayed.
2. Tap Fire to send an alarm for emergency fire assistance.
The TouchScreen sounds a repeating, high-pitched chime.
Tap Medical to send an alarm for emergency medical assistance.
The TouchScreen sounds an audible, repeating, triple beep signal.
Tap Police to send an alarm for police assistance.
By default the TouchScreen will not issue an audible signal. The TouchScreen displays a Police
Panic In Progress alert on the TouchScreen. Tap the alert to sound an audible, continuous, high-
pitched chime.
Managing Sensors
You cannot add or delete the sensors in your security system, but you can control how they appear in
reports, your TouchScreen and the Subscriber Portal.
You can:
Have a sensor not monitored when the system is armed (see page 30)
View your security zone event history (see page 30)
Change the order that security zones are listed in the TouchScreen (see page 31)