User's Guide
Table Of Contents
- Compliances
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Managing Sensors
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- View Your Security Account Information
- Maintaining & Configuring the TouchScreen Device
- Appendix 1: TouchScreen Installation and Maintenance
- Appendix D: Quick Reference Tables
30
Disable a Sensor
You can turn a zone off, which means the zone is not monitored when the system is armed. This is useful
during periods when a sensor is being repaired. You can only turn a zone off when the system is
disarmed.
The system continues to log the activity of zones that are turned off in the Event History (see Viewing
Your Zone Event History on page 30).
To turn zones off:
1. Disarm the system (see "Arming and Disarming the System" on page 23)
2. Tap the Security icon on the Home screen (see page 18).
The Arm System tab is displayed.
3. Tap the Turn Zone Off button for the zone to turn off the zone.
Tap the Turn Zone On button for the zone to be monitored for alarms.
The buttons are toggled between Turn Zone On and Turn Zone Off as you tap them.
Note: If some zones are turned off, the Security Status header reports this when the system
is disarmed.
Viewing Your Zone Event History
When something occurs at a zone, whether or not the system is armed, or the zone is turned off, the
security system logs an event.
To view the Zone Event History:
1. Tap the Security app on the Home screen.
TouchScreen User's Guide