User's Guide
Table Of Contents
- Compliances
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Managing Sensors
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- View Your Security Account Information
- Maintaining & Configuring the TouchScreen Device
- Appendix 1: TouchScreen Installation and Maintenance
- Appendix D: Quick Reference Tables
42
The Screen Configuration menu is displayed.
2. Tap Automatic Screen Dimming.
A couple of controls are provided that allow you to set automatic dimming level and the amount
of idle time for the TouchScreen to wait before dimming.
The Idle Timeout maximum is 30 minutes. It decreases in increments of 5 minutes.
To have the screen never dim due to inactivity, set the Dimming Level to 10. This also requires that
the Backlight off at night setting is No.
To configure the screen to dim completely during a set time period (Night Mode):
Note: When a user touches the screen, it will brighten to its default brightness level.
Note: At the set time range, the screen will dim to its lowest setting (1).
1. From the Settings menu (see "Configuring the TouchScreen" on page 9), tap TouchScreen
Screen Configuration.
TouchScreen User's Guide