User's Guide
Table Of Contents
- Compliances
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Managing Sensors
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- View Your Security Account Information
- Maintaining & Configuring the TouchScreen Device
- Appendix 1: TouchScreen Installation and Maintenance
- Appendix D: Quick Reference Tables
44
Configuring the Screensaver
You can configure the TouchScreen to display a screen saver after the device has been inactive for some
period of minutes.
The TouchScreen will not enter screensaver mode when it is Armed.
See also: Understanding and Configuring Screen Brightness & Screen Dimming on page 40 for how to
have the screen dim to a configured level after a period of inactivity. This can be used instead of a
screensaver or in conjunction with a screensaver.
To configure the TouchScreen screensaver:
1. From the Settings menu (see "Configuring the TouchScreen" on page 9), tap TouchScreen
Screensaver Configuration.
The Screensaver Configuration screen is displayed.
2. Tap the Start Screensaver arrow buttons to choose the number minutes of inactivity before the
TouchScreen will start the screensaver. The options are in five second increments. The maximum
number of seconds is 30 and the least is 5.
3. In the Select Screensaver Widget menu, tap the app that will be used as a screensaver.
TouchScreen User's Guide