User's Guide
Table Of Contents
- Compliances
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Managing Sensors
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- View Your Security Account Information
- Maintaining & Configuring the TouchScreen Device
- Appendix 1: TouchScreen Installation and Maintenance
- Appendix D: Quick Reference Tables
Maintaining & Configuring the TouchScreen Device
45
Table 7: Commonly Used Screensavers
Control Description
None The screen never goes to screensaver.
Security
Dashboard
Screen displays the Arm System tab from the Security app.
Camera Displays stills of the cameras attached to the security system (updated every 5 seconds). If
there is only one camera attached to the security system, it displays live video.
Clock Displays the current time in digital or analog.
Photos Displays a slideshow of photos from your Flickr account.
Configuring the Tones and Volume Levels
You can configure the sounds the TouchScreen plays when a security zone is faulted or cleared.
You can also configure the volume that the TouchScreen sounds are played.
To set the tones that the TouchScreen uses when zone events occur:
1. From the Settings menu (see "Configuring the TouchScreen" on page 9), tap
TouchScreen Sound Configuration.
The Sounds Configuration screen displayed.