User's Guide
Table Of Contents
- Compliances
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Managing Sensors
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- View Your Security Account Information
- Maintaining & Configuring the TouchScreen Device
- Appendix 1: TouchScreen Installation and Maintenance
- Appendix D: Quick Reference Tables
46
Red icons(for example for door being opened) designate the sound played when a zone is
faulted.
Green icons (for example for a door being closed) designate the sound played when a zone is
cleared.
2. Tap a field to display a menu to sounds to play when a zone is faulted or cleared.
3. Tap Silence to have the TouchScreen never play a tone when the associated security zone is
faulted.
Cleaning the TouchScreen Screen
The TouchScreen can be hard to clean without accidentally pressing buttons; even accidentally arming or
disarming the system.
To clean the TouchScreen screen:
1. From the Settings menu (see "Configuring the TouchScreen" on page 9), select Touchscreen
Clean Screen.
The Clean Screen is displayed.
2. Tap Clean Screen for 30 Seconds to display the Cleaning screen.
You have 30 seconds to clean the TouchScreen without fear of pressing buttons.
TouchScreen User's Guide