User's Guide
Table Of Contents
- Compliances
- Welcome to the TouchScreen
- Using the TouchScreen
- Managing Your System Security
- Understanding Arming Modes
- Understanding Your Protection Against Smash & Grab Attacks
- Arming and Disarming the System
- Sending an Emergency Alarm
- Managing Sensors
- Testing Your Alarms
- Managing Connectivity Between the TouchScreen and the Central Monitoring Stat...
- Managing the Passcodes in your Security System
- View Your Security Account Information
- Maintaining & Configuring the TouchScreen Device
- Appendix 1: TouchScreen Installation and Maintenance
- Appendix D: Quick Reference Tables
48
Appendix 1: TouchScreen Installation and Maintenance
Installing the Technicolor TouchScreen
1. Remove the TouchScreen from its packaging.
2. Use a P1 Phillips screwdriver to remove the (1)
screw from the battery cover of the Touch-
Screen, and detach the cover.
The 4.0 volt lithium polymer battery is
wrapped and unconnected in the battery
compartment of the TouchScreen.
Warning: The rechargeable battery that came
with your TouchScreen is only available
through your service operator. If your battery
needs to be replaced, contact your service
operator to arrange for replacement.
3. Unwrap the battery from its packaging and install it in the battery compartment.
4. Position the battery and cables inside the battery com-
partment so the cables lie along the top of the battery.
5. Align and connect the battery’s pins to the battery con-
nector so that the wire order is (left-to-right) RED,
WHITE, BLACK.
6. Replace the battery cover and the screw.
7. Place the AC power cable into the clamp of the TouchScreen stand.
TouchScreen User's Guide