Quick Start Guide

8
Special Rules:
If you selected the Arm Away mode, you have until the Exit Delay is over to exit the prem-
ises.
Otherwise, the system is automatically armed in Arm Stay mode. There is still an Exit Delay
period for the other Arming modes as well, but they do not require that the door open and
close during the period.
If you open and shut an Entry/Exit door during the Exit Delay and then re-enter the prem-
ise, the Exit delay restarts at 120 seconds for Arm Stay and Arm Night or 60 seconds for Arm
Away. It will only do this one time. If the wrong code is entered, the countdown timer
resets to 60 or 120 seconds.
If an Entry/Exit door is left open at the end of Exit Delay, the Entry Delay immediately starts
and, if the system is not disarmed, an alarm will sound.
Cancelling the Arming Process
If you arm the system in Arm Away or Arm Stay mode, the Security Status header displays a countdown
of the number of seconds until the Exit Delay is over. You can choose to cancel the arming process.
To cancel the arming process:
1. Tap the Security Status header while it is displaying a countdown.
The Security app is displayed with a keypad and the Disarm System tab active.
The Security app is displayed with a keypad and the Arm System tab open.
2. Enter your security code to stop the arming process.
Disarming the System
When you enter an armed premises, an Entry Delay period starts:
During the Entry Delay, the header changes to announce the number of seconds before the alarm
goes off.
TouchScreen Quick Start Guide