User's Manual

Sensors consist of door/window sensors, motion detectors, glass break detectors, and smoke alarms.

Table 6: Sensor Operations

Operation Description

Modify sen-

sor details

Change (within limits) the details of a sensor (see page 95).

Delete a

sensor

Remove a sensor from being man-

aged by the TouchScreen (see

page 98).

Use these actions in sequence to reset a sensor’s

IP/MAC addresses to factory default.

Add a sen-

sor

Find a new sensor that is available

to be added (see page 96).

Create a

cross zone

association

Configure two sensors to trip an alarm only if they are both faulted (see page 104). For

example, an alarm sounds when a door sensor is faulted ONLY if an associated motion

sensor also is faulted.

View sen-

sor diag-

nostics

View the connectivity details and signal strength of a sensor (see page 100).

Manage

fire alarm

settings

Toggle Fire Alarm Verification to

determine how the system triggers

fire alarms (see page 92

Disabled Central monitoring station

is contacted when one

smoke alarm sounds.

Enabled Central monitoring station

is notified when:

Multiple smoke

detectors sound an

alarm.

One smoke detector

sounds an alarm for

60 seconds.

Home System Installation Guide