V E R I Z O N QUICK SETUP GUIDE DRAFT A detailed User Guide is available at verizonwireless.com/hub © 2009 Verizon. All rights reserved.
Box contents 4 5 V E R I Z O N 3 QUICK INSTALLATION GUIDE 2 1 A detailed User Guide is available at verizonwireless.com/hub © 2009 Verizon. All rights reserved. You box contains the following items: 1 Power Adaptor 2 A white Ethernet cable 3 A yellow Ethernet cable 4 The Hub 5 This Quick Setup Guide Connect the Hub to the Bridge Modem WAN Internet Bridge Modem Proceed as follows: 1 Plug one end of the white Ethernet cable in the Hub’s white WAN port.
Connect the Power adapter. Power Proceed as follows: 1 Plug the connector of the electric power adapter into the Hub’s Power port. 2 Plug the adapter into a nearby power outlet. Turn on the Hub Push the On/Off button to turn on the Hub. After some time: • The Power LED should be solid green. • The Ethernet LED should be solid/flashing green. • The BroadBand LED should be solid green. If this is not the case, check the connections that you made in the previous steps.
Safety Instructions and Regulatory Notices BEFORE YOU START INSTALLATION OR USE OF THIS PRODUCT, CAREFULLY READ THESE INSTRUCTIONS ! When using this product, always follow the basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: • Always install the product as described in the documentation that is included with your product. • Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Electrical powering The powering of the product must adhere to the power specifications indicated on the marking labels. The power supply must be Class II and a Limited Power Source in accordance with the requirements of IEC60950/ EN60950, Clause 2.5 and rated as indicated on the label on the bottom side of your product. It must be tested and approved to national or local standards.
*DSL36648320* DSL36648320 © Verizon 2009. All rights reserved. TBD v0.2. Printed in PRC.