User's Manual

103
To define a new connection with a fixed IP address:
1. Click New Static Connection in the DHCP Connections screen. The “DHCP Connection Settings” screen
appears.
2. Enter a host name for this connection.
3. Enter the fixed IP address to assign to the computer.
4. Enter the MAC address of the computer’s network card.
5. Click the Apply to save changes.
Note: A device’s fixed IP address is actually assigned to the specific network card’s MAC address
installed on the network computer. If this network card is replaced, the device’s entry in the
DHCP Connections list must be updated with the new network card’s MAC address.
To remove a host from the table, click the appropriate “Delete” icon in the Action column.