User's Manual

E-DOC-CTC-20080527-0012 v1.0
74
8 Internet Security
3 In the Pick a task list, click Activate Web Filtering License.
4 The Web Filtering Activation page appears. Under License Type, select:
 30-days evaluation if you first want evaluate this feature.
 Standard if you have already purchased a license key. The License key box appears as soon as you
select this option. Type the license key that you received from your service provider in this box.
5 Click Apply.
Option 1: content-based filter (combined with the address-based filter)
If you want to use the content-based filtering:
1 Browse to the Thomson Gateway GUI.
2 On the Toolbox menu, click Parental Control.
3 On the Navigation bar, click Configure.
4 Make sure that the Use Content-Based Filter check box is selected.
5 Configure the content-based filter. For more information, see “8.2.1 Configuring The Content-based
Filter” on page 75.
6 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter.
For more information, see “8.2.2 Adding Rules for the Address-Based Filter” on page 76.
Option 2: address-based filter only
Take this option if content filtering is not available on your Thomson Gateway or you don’t want to use it.
To configure address-based filtering:
1 Browse to the Thomson Gateway GUI.
2 On the Toolbox menu, click Parental Control.
3 On the Navigation bar, click Configure.
4 Make sure that the Use Address-Based Filter check box is selected.
5 In the Action for Unknown Sites, select:
 Allow as the default rule if you want to allow access to all web sites and manually specify which web
sites may not be accessed.
 Block as the default rule if you want to deny access to all web sites and manually specify a number of
web sites that may be accessed.
6 Click Apply.
7 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter.
For more information, see “8.2.2 Adding Rules for the Address-Based Filter” on page 76.