- Thomson LCD TV Owner's Manual

2
9.Power cord protection—The power cords must be routed properly to prevent people from stepping on them or
objects from resting on them. Check the cords at the plugs and product.
Power-supply cords should be routed so that they are not likely to be walked on or snagged by items placed upon or against
them. Pay particular attention to cords at doors, plugs, receptacles, and the point where they exit from the product.
10.Attachments—Do not use attachments not recommended by the manufacturer. Use of improper attachments can result
in accidents.
11.Accessories—When the product is used on a trolley, care should be taken to avoid quick stops, excessive force, and
uneven surfaces that may cause the product and trolley to overturn, damaging equipment or causing possible injury to the
operator. Do not place this product on an unstable trolley, stand, pedestal, bracket, or table. The product may fall, causing
serious injury to a child or adult and serious damage to the product. The product should be mounted according to the
manufacturer’s instructions, and use only with a trolley, stand, pedestal, bracket, or table recommended by the manufacturer.
12.Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other
dangerous conditions. Request a qualified service person to perform servicing.
13.Replacement parts—In case the product needs replacement parts, make sure that the service person uses replacement
parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of
unauthorized parts can result in fire, electric shock and/or other danger.
14.Power source—This product is intended to be supplied by a listed power supply, output rated 19 V DC, 4.5A minimum,
indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For added protection for this product during a lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the
product due to lightning and power line surges. When the unit has to be used with another power supply voltage, the power
cable must be changed. Consult your product dealer. The socket outlet should be installed near the equipment and easily
accessible. The power supply voltage rating of this product AC adaptor is AC100-240V. The power cord attached conforms to
the following power supply voltage. Use only the power cord designated by our dealer to ensure safety and EMC. When
connecting other products such as VCRs and personal computers, you should turn off the power of the unit for protection
against electric shock. If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from your dealer.
15.Overloading—Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can
result in a risk of fire or electric shock.
16.Entering of objects and liquids—Never insert an object into the product through vents or openings. High voltage
flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not
spill water or liquid on the product.
17.Damage requiring service—If any of the following conditions occurs, unplug the power cord from the AC outlet, and
request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not
described in the instructions can cause damage, which often requires extensive adjustment work by a qualified technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable abnormality in
the product indicates that the product needs servicing.
18.Safety checks—Upon completion of service or repair work, request the service technician to perform safety checks to
ensure that the product is in proper operating condition.
19.Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according
to the method recommended by the manufacturer.
This is a safety feature.