- Philips Rear-projection HDTV Monitor Brochure

37
SELECTING THE SAP (SECOND AUDIO PROGRAM) FEATURE
Using the Onscreen Submenus: Sound
S
AP, or Second Audio Program, is an addi-
tional part of the stereo broadcast system.
Sent as a third audio channel, an SAP can be
heard apart from the current TV program sound.
TV stations are free to use SAP for any number
of purposes, such as the broadcast of a second
language or other audio information.
If an SAP signal is not present with a selected
program, the SAP option cannot be selected.
PICTURE
SOUND
FEATURES
INSTALL
TREBLE
BASS
BALANCE
AVL
INCR
.
SURROUND
TREBLE 30
BASS
BALANCE
AVL
INCR
.
SURROUND
SOUND
SOUND
BALANCE
AVL
INCR
.
SURROUND
STEREO
SAP OFF
IF A SECOND AUDIO PROGRAM
IS NOT BEING BROADCAST:
SAP NOT AVAILABLE
IF A SECOND AUDIO PROGRAM
IS BEING BROADCAST:
SAP ON
SAP OFF
OR
3,5
6
2
4
1
SAP
Button
Selecting SAP Using
the TV Buttons
Should your remote control become lost or other-
wise unavailable for use, follow the steps below to
use the buttons on the front of the TV to access the
onscreen menu and select SAP.
NOTE: SAP must be broadcast with the program
you are watching for you to be able to select the
feature.
1
Press the Volume + and – buttons
simultaneously. The onscreen menu
appears.
2
Press the Channel Down button to
highlight SOUND. Then press the
Volume + button to enter the SOUND
submenu.
3
Press the Channel Down button
repeatedly until SAP is highlighted.
Then press the Volume + or – button to
turn SAP on or off.
4
Press the Volume + and – buttons
simultaneously and repeatedly until you
back out of the menu screens.
Selecting SAP Using
the Remote Control
Select SAP immediately by pressing the
SAP button on the remote control if the feature is
being made available with the program you are
watching.