OWNER'S MANUAL IMPORTANT! WARRANTY INFORMATION INSIDE. PLEASE READ FOR INQUIRIES CALL 1800 656 700 OR WWW.TEAC.COM.AU EU2845ST&2845W-MAV-1541-ENG-STEREO-AK45.p65 1 09.09.
WARRANTY REGISTRATION Please read this warranty card. Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service. Warranty Terms & Conditions 1. TEAC warrants to the original retail purchaser only, that this product is free from defects in material and workmanship under normal domestic use and authorises free service during the warranty period at any TEAC Authorised Centre only. TEAC warranty only applies to products purchased, used and serviced in Australia. 2.
Keep this warranty information and your purchase receipt Your proof of purchase (receipts) will enable fast and efficient service in the event of repair. WARRANTY PROCEDURES Please keep this information for your own records. Please refer to the owner's manual to ensure that you have followed the correct installation and operating procedures. 1. Read owner's manual carefully 2. If you require Warranty Service, please contact the TEAC Service Centre 3.
Contents Remote Control .............................................. 5 Teletext ......................................................... 18 Control Panel Buttons and Rear Panel ....... 6 1) To operate Teletext .......................................... 2) To select a page of Teletext ............................. 3) To Select Index Page ...................................... 4) To Select Teletext with a TV Programme ......... 5) Searching for a page while watching TV ..........
Remote Control = Stand By = Cursor Up = Cursor Right OK = No function = Info (Program Menu) 0 - 9 = Direct Program -/-- = Double Digit P
Control Panel Buttons and Rear Panel FRONT PANEL REAR PANEL Speakers (left + right) = Power On / Off - + = Volume -/+ VIDEO ( H-PHONE ( )= VCR ) = Headphone 3,6 mm Ø ANT = Antenna (75 W) - P/CH + = Program -/+ EXT.1 = Scart Socket 1 (RGB) MENU = Menu EXT.2 = Scart Socket 2 (YCbCr) AUDIO L ( ) = Audio left Power Cable AUDIO R ( ) = Audio right ENGLISH - 6 EU2845ST&2845W-MAV-1541-ENG-STEREO-AK45.p65 6 09.09.
Safety and Precautions To ensure safe and reliable operation of the TV set, please observe the following precautions in installation, operation and maintenance. Attention: 1. Pay attention to the power supply cord before installing the TV set. Do not hang anything on the cord, and avoid treading on the cord. 2. The slots on the housing back are designed for ventilation to ensure reliable operation of the TV set and prevent overheating. They must never be covered or blocked.
Dear Customer: Before Switching on your TV Thank you for purchasing our latest TV set. Please read this instruction manual carefully first before operation so that you can use it in a safe and reliable manner and bring all its functions into full play. Please also keep it properly for future reference. Preparation For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.
NOTE: Remove batteries from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries. Switching the TV ON/OFF If you do not want to start A.P.S., you can cancel it by pressing the 79 button on your remote control. When you start A.P.S. the below menu will appear on the screen. To switch the TV on Your TV will switch on in two steps: 1- Press the power button located on the front of the TV.
Programme Selecting (direct access) MENU Press digit buttons on the remote control handset to select programmes between 0 and 9. TV will switch to the selected programme. To select programmes between 10 - 99, you must use the double digit button "- / - -". The menu system is described below. The short way in order to enter the menus, press : M Button, Menu. Red Button, Sound Menu. Green Button, Picture Menu. Yellow Button, Feature Menu. Blue Button, Install Menu. Info Button, Program Menu.
Selecting Sound Mode Using or button select Mode. Press or button to change Mode. You can select MONO, STEREO, DUAL-I or DUAL-II mode, only if the selected channel supports that mode. You can also change sound mode directly pressing III button on your remote control. Pressing or button will change the current sound mode. (e.g.: If the current sound mode is stereo, it will be stereo or visa versa).
To Store the Settings Using Press or button on STORE option to store Sound menu settings. Press button to increase colour level. or button select Colour. Press button to decrease colour level. %5,*+71( 66 &21 75$67 &2/2 85 6+$5 31(66 7,/7 3,&785( 02' ( 0$ 18$/ &2/2 85 7(03 125 0$/ Picture Menu Setting Sharpness To enter the Picture menu directly, press the GREEN button, or Press M button, now you are in MENU.
%5,*+71( 66 &2175$67 &2/2 85 6+$5 31(66 7,/7 9&5 02 '( 2)) 3,&785( 02' ( 0$ 18$/ 16:9 Setting Picture Mode This item is used to change the picture mode. By pressing or button you may select one of these options: BRIGHT, STANDARD, SOFT, MANUAL. This mode restores the correct proportions of pictures transmitted in 16:9 using full screen display. Note: If you display a 4:3 picture in thid mode, it will be enlarged horizontally.
Adjusting the visible area of the picture: Child Lock If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually. You can use this feature to prevent children turning on TV or changing programs or adjustments etc. without remote control. 1. Press button once. The ZOOM mode indicator appears. The ZOOM mode will not be changed. The Child Lock feature can be set by or button to either ON or OFF.
1.Selecting Programme 6.Selecting Search To select programme number, you can use or button, Digit Buttons or The Double Digit button with digit buttons. To start the search process, press button for forward search or button for backward search. Search item bar blinks during search process, up to the process is stopped or signal is found. To stop the search process or button must be pressed again. 7.To Store Settings 2.
contrary, if the cursor is at the beginning of the Programme Name, pressing button moves the cursor at the end.
3) Double-digit (- -) 7) Blue Background During No-Signal This OSD is displayed when the "Double-Digit" button pressed in place of the programme number indicator. In case, no valid signal is detected (in TV or AV mode) Blue Background is activated. During search process Blue Background is not active. But instead of it there is another feature given; the semi-transparent menu background is made blue. After then, in order to enter a programme it must be pressed to two digit consecutively.
5) Searching for a page while watching TV Teletext Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index). On screen display is not available in text mode. Contrast, brightness or colour control is not available, but volume control is available in text mode. 1) To operate Teletext Select a TV station on which Teletext is being transmitted.
If the selected subcode page is not displayed in a short time, press button. TV programme will be displayed on the screen. Teletext page number will be displayed on the upper left corner of the screen when the selected page is found. Press page. button to display the selected Teletext 10 To exit Teletext Press mode. button. The screen will switch to TV 11) To Display the Time While watching a TV programme with Teletext transmission press button.
6) Playback NTSC 11) Connecting Headphones Connect NTSC VCR player to Euroconnector at the back of the TV. Connect NTSC VCR player to RCA Jack at the front of the TV. Use the stereo headphone socket on the lower right side of your TV, to connect headphones. Then, press $9 button to select (EXT-1, RGB, YCbCr and F-AV). 7) Copy Facility Source selection for VCR recording. Select Features Menu in the MENU. Select EXT-2 OUTPUT source pressing or button.
Connect Peripheral Equipment CAMERA AUDIO HEADPHONE VIDEO DECODER FOR SATELLITE RECEIVER Antenna Connections 2XWGRRU $QWHQQD &RQQHFWLRQV 9+) DQWHQQD 5RXQG RKP FRD[LDO FDEOH W 9+) 8+) 5HDU RI 79 W 9+) 8+) DQWHQQD )ODW RKP WZLQ OHDG FDEOH 9+) 8+) 5HDU RI 79 5RXQG RKP FRD[LDO FDEOH ENGLISH - 21 EU2845ST&2845W-MAV-1541-ENG-STEREO-AK45.p65 21 09.09.
Specifications Tips Care of the Screen Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer. Poor Picture Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers, non-earthed audio equipment or neon lights, etc.? Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.
EU2845ST&2845W-MAV-1541-ENG-STEREO-AK45.p65 23 09.09.
