Model No: DP50747 If you need additional assistance? Call toll free 1.800.877.5032 We can Help! Owner’s Manual Table of Contents . . . . . . . . . . . 5 Frequent Asked Questions (FAQ) . . . . . . . . . . .
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE ADHERE TO ALL WARNINGS ON THE PRODUCT AND IN THE OPERATING INSTRUCTIONS. BEFORE OPERATING THE PRODUCT, PLEASE READ ALL OF THE SAFETY AND OPERATING INSTRUCTIONS. RETAIN THIS LITERATURE FOR REFERENCE. Follow all instructions... 15. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. In the U.S.
TO THE OWNER Welcome to the World of Sanyo Thank you for purchasing this Sanyo High-Definition Digital Plasma Television. You made an excellent choice for Performance, Reliability, Features, Value, and Styling. Important Information Before installing and operating this DTV, read this manual thoroughly. This DTV provides many convenient features and functions. Operating the DTV properly enables you to manage those features and maintain it in good condition for many years to come.
CONTENTS TO THE OWNER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . 3 ~ 4 PROTECTING THE PLASMA SCREEN . . . . . . . . . . . . . . . . 4 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 HANDLING PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .8 POSITIONING PRECAUTIONS . . . . . . . . . . . . . . . . . . . . .
FEATURES 50" Plasma HDTV Channel Scan Memory Detachable Stand Receives 181 Analog Channels (VHF 2~13 and Trilingual Menu Options (English, Spanish, or Channels French) Integrated Digital/Analog Tuner XDS (Extended Data Services) displays station call letters, title of show, and ratings when broadcast Energy Saver Mode Screen Savers: UHF 14~69; Cable 14~125); and 99 Digital White Pattern Picture Rotation Sleep Timer (3 hours) 32-Key Remote Control Automatic Channel Search
SPECIFICATIONS SCREEN SIZE: 50" Wide Screen (Measured Diagonally) Weight: SCANNING FORMAT: 720p (All Signals are Converted to 720p) Specifications are subject to change without notice. RESOLUTION: 1365 x 768 (WXGA) RF ANTENNA INPUT: 75 ohm—Digital/Analog POWER REQUIREMENT: Source: AC 120V, 60Hz POWER CONSUMPTION: 460 Watts (Average) SOUND: Two Speakers, size: 6 x 12 cm MOUNTING BRACKET: Vesa Standard or Universal 102.0 (lbs.) 46.
HANDLING PRECAUTIONS • Handle the Plasma DTV carefully when installing. Do Not Drop. • Throughout the installation process, handling by more than two people is recommended. • When removing the stand, use a working space that is larger than the screen size. The work surface must be flat and covered with a soft cloth or blanket to protect the screen surface. • Before placing the Plasma DTV face down, make sure there are no objects under the screen. Leaving any object may cause damage on the screen surface.
REMOVING THE STAND (OPTIONAL) Tools Needed: Phillips screwdriver Important Note: Place DTV face down on a padded or cushioned surface that is larger than the screen size to protect the screen and finish. Handling by more than two people is recommended. 1 Remove four (4) screws from the metal bracket. CAUTION: Hold the stand firmly as you remove the last screw. 2 Carefully remove the stand.
RIGHT SIDE PANEL (VIEWED FROM FRONT) POWER VOLUME + – CHANNEL These keys operate exactly like the Remote Control keys. (Go to page 28, for more detail information, if needed.
HDTV BACK PANEL Analog / Digital Antenna Input—Connect an RF antenna or Analog Cable system to this jack. See PAGE 15 for Signal connections. HDMI INPUT1/2/3 (High-Definition Multi-media Interface), PAGE 7— Connect digital video equipment to this jack. It takes only one cable (not supplied) to communicate between audio/video equipment and this DTV. HDMI (DVI) INPUT1 jack is compatible with DVI equipped AV devices. (Separate audio connection and an adapter are required for DVI device.
HDTV BACK PANEL (Continued) Service Port—For production use only. Component Video Input (VIDEO2 or VIDEO3)—Connect digital video equipment to the Y (green), Pb (blue), Pr (red) and Audio L/R jacks. These jacks will automatically detect the type of signal being received. See PAGES 20, 21, and 22 for Component jack connections. AC IN 120V—Connect power cord here. See PAGE 16.
GLOSSARY OF CABLES Audio Cables—Provides analog left/right audio for your external equipment connections. Coaxial Digital Audio—Use this cable to connect the DTV‘s digital audio output to a multichannel audio receiver. Component: Y, Pb, Pr—Use these cables to connect your component equipment. This connection provides the best picture, but does not include sound. (Cable colors: Y = green, Pb = blue, and Pr = red.
CHOOSE YOUR CONNECTION This DTV is designed to handle several different connections making it compatible with Digital and Analog devices. Digital Signal Connections Compatible External Equipment Cables Needed (Not Supplied) VIDEO GAME HDMI Will accept HDTV (High Bandwidth Video component) COMPONENT (Y, Pb, Pr) IN In order to receive the best performance from your DTV, choose your connection using this chart; then go to the specified page for detailed instructions.
GETTING STARTED (REQUIRED INITIAL SETUP) 1 Install batteries in remote control (2AA, not included). Match the “+” and “–” signs on the batteries with marks inside the remote control. PRECAUTIONS To ensure safe operation, please observe the following precautions: Replace both batteries at the same time. Do not use a new battery with a used battery. Risk of explosion, if battery is replaced by an incorrect type. Do not expose the Remote Control Unit to moisture or heat.
GETTING STARTED (REQUIRED INITIAL SETUP) Continued 3 Connect AC Power Cord (supplied) to the Plasma DTV and electrical outlet as shown here. The AC outlet must be near this equipment and must be easily accessible. To POWER CORD CONNECTOR on back of Plasma HDTV. To 120 V AC outlet. 4 Press the POWER key. (Follow on-screen instructions).
GETTING STARTED (REQUIRED INITIAL SETUP) Continued 5 Perform “All Channel Search.” The All Channel Search will search for off-air digital and analog channels, and analog cable channels. The DTV can receive cable or off-air channels, but not at the same time. If after two searches the DTV still fails to detect any channels, the DTV will tune to Video1. Note: If EXIT is pressed, the DTV will skip Channel Search and tune to Video1 without storing any channels in the Channel Map databases.
HDMI INPUT 2 OR INPUT 3 CONNECTION: Connection Option 1 HDMI CONNECTIONS (INCLUDES HDCP COPY PROTECTION)—Receiving the ultimate picture 1 2 Connect the external equipment’s HDMI Output to a DTV HDMI Input. Press INPUT to select HDMI 2 or HDMI 3 to view the digital program. DTV HDMI INPUT2 / INPUT 3 GAME SYSTEM DVD PLAYER (or similar device) INPUT REMOTE CONTROL OPERATING TIPS: Press the INPUT key after connecting cables to access the HDMI2 or HDMI3 input.
HDMI INPUT1 CONNECTION: Connection Option 2 DVI TO HDMI INPUT1 CONNECTIONS (INCLUDES HDCP COPY PROTECTION)—Receiving the ultimate picture 1 2 Connect the Set-top Box (STB) DVI Output to the DTV’s HDMI INPUT1. 3 Press INPUT to select HDMI 1 to view the digital program. Connect the STB Audio out to the DTV’s VIDEO3 Audio In L / R. IMPORTANT FACT: Only the HDMI INPUT1 jack can accept a DVI (digital video interface) signal.
VIDEO2 & 3 COMPONENT JACKS: Connection Option 1 CONNECTING A SET-TOP (STB) 1 2 Connect a Component Cable to the VIDEO2 Green, Blue, and Red video jacks. 3 Connect an Audio Cable to the matching VIDEO2 White and Red audio jacks. Note: Press INPUT to select Video 2 to view the program. VIDEO2 and VIDEO3 jacks have identical functions. Compatible video devices can be connected to either or both sets of jacks. INPUT DTV VIDEO2 SET-TOP BOX (HD Satellite, HD Cable, etc.
VIDEO2 & 3 COMPONENT JACKS: Connection Option 2 CONNECTING A DVD PLAYER 1 2 Connect a Component Cable to the VIDEO3 Green, Blue, and Red video jacks. 3 Press INPUT to select Video 3 to view the program. Connect an Audio Cable to the matching VIDEO3 White and Red audio jacks. Note: VIDEO2 and VIDEO3 jacks have identical functions. Compatible video devices can be connected to either or both sets of jacks.
VIDEO2 & 3 COMPONENT JACKS: Connection Option 3 CONNECTING A GAME SYSTEM 1 2 Connect a Component Cable to the VIDEO2 / 3 Green, Blue, and Red video jacks. 3 Press INPUT to select Video 2 or Video 3 to view the program. Connect an Audio Cable to the VIDEO2 / 3 White and Red audio jacks. DTV VIDEO2 GREEN, BLUE, RED VIDEO JACKS AUDIO L/R JACKS GAME SYSTEM INPUT REMOTE CONTROL OPERATING TIPS: Press the INPUT key after connecting cables to access the VIDEO2 or VIDEO3 input.
VIDEO1 COMPOSITE (ANALOG) JACKS: Connection Option 1 CONNECTING ANALOG CABLE, CABLE BOX, VCR, AND AN ANTENNA TO THE DTV 1 2 3 Connect Analog Cable Box “Antenna Out” to the VCR “Antenna In.” 4 Connect an Antenna to the DTV ANT terminal. Connect the VCR AV out jacks to VIDEO1 Yellow, White, and Red jacks. 5 6 Tune VCR to channel 3 or 4 to match your Cable Box. 7 Select Cable channels with the cable box remote control. Select Antenna channels with the DTV remote control.
VIDEO1 COMPOSITE (ANALOG) JACKS: Connection Option 2 CONNECTING ANALOG CABLE, VCR, AND AN ANTENNA TO THE DTV 1 2 3 Connect Analog Cable system to the VCR “Antenna In.” Connect the VCR AV out jacks to VIDEO1 Yellow, White, and Red jacks. Connect an Antenna to the DTV ANT terminal. 4 Press INPUT to select Video 1 to watch Analog Cable channels OR to TV channels to watch Antenna channels. 5 Select channels with the VCR’s remote control. Select Antenna channels with the DTV remote control.
VIDEO1 COMPOSITE (ANALOG) JACKS: Connection Option 3 CONNECTING A DVD PLAYER TO THE DTV 1 2 3 Connect DVD Player to the TV S-Video In Jack. Connect an Audio cable to the VIDEO1 White and Red AV jacks. DTV VIDEO1 Press INPUT to select Video1 to view a DVD. S-VIDEO JACK WHITE & RED AUDIO JACKS INPUT REMOTE CONTROL OPERATING TIP: Refer to the owner’s manuals and user’s guides that came with your external equipment for connection options.
DTV AUDIO OUT JACKS (DIGITAL & ANALOG) CONNECTING AN AV RECEIVER TO THE DTV 1 Connect a Coaxial Digital Audio cable from the DTV Digital Audio Output jack to a Coaxial Digital Audio In jack on an AV Receiver. 2 Connect an Audio cable from the DTV Audio Out jacks to Audio In jacks on the AV Receiver. Note: Dolby® Digital 5.1 audio is available only at the Digital Audio Output and only when received as part of a Digital Antenna signal.
DTV AUDIO OUT JACKS (ANALOG) CONNECTING A STEREO AMPLIFIER TO THE DTV 1 Connect a Stereo Amplifier to the TV Audio Out jacks as shown. Note: Do not connect external speakers directly to the DTV. DTV AUDIO OUT OPERATING TIP: Refer to the owner’s manual that came with your external equipment for connection options. STEREO AMPLIFIER HELPFUL HINTS (PROBLEMS/SOLUTIONS) SYMPTOM No Sound or Poor Sound CHECK THESE CONDITIONS TRY THESE SOLUTIONS Check Switch external equipment connections.
REMOTE CONTROL OPERATION POINT TOWARDS TV Number Keys—Two keys must be pressed to select a direct channel. Example: Press 0 then 6 to select channel 6. (See item #5 below.) INPUT POWER 1 2 3 4 5 6 7 8 9 INFO RECALL Input Key—Press to select the program source to watch: Analog RF Digital RF Video 1 Video 2 Video 3 HDMI 1 HDMI 2 HDMI 3 Analog RF.
REMOTE CONTROL OPERATION POINT TOWARDS TV Key—Press to display the Digital and Analog Full Info Banner information. The banner contains the following: program title, station ID, program rating, signal strength, channel number, tuner ID, and audio information. INPUT POWER 1 2 3 4 5 6 7 8 9 INFO RECALL 0 1-- DIGITAL INFO BANNER SLEEP MUTE ANALOG INFO BANNER MENU ENTER Key—Press to switch between the last two Recall channels selected.
REMOTE CONTROL OPERATION (Continued) 12 Sleep Key—Press this key then the “0” key to set the Sleep Off Timer. Time can be set in 30-minute increments up to 3 hours. POINT TOWARDS TV Note: The Sleep Timer cancels when the TV is turned off or if a power failure occurs. INPUT POWER 1 2 3 4 5 6 7 8 9 INFO RECALL 0 1-- SLEEP 12 MUTE 13 MENU ENTER CAPTION EXIT CH PIX SHAPE AUDIO 13 Mute Key—Press once to mute the sound. Press again to restore the sound.
REMOTE CONTROL OPERATION (Continued) 14 Audio Key—Press to select the desired audio mode (if available as part of the broadcast signal). POINT TOWARDS TV INPUT POWER 1 2 3 4 5 6 7 8 9 INFO 0 RECALL 1-- DIGITAL AUDIO MODE SELECTIONS SLEEP MUTE Stereo MENU ENTER Mono SAP CAPTION ANALOG AUDIO MODE SELECTIONS EXIT CH VOL PIX SHAPE AUDIO 14 RESET HELPFUL HINTS (PROBLEMS/SOLUTIONS) SYMPTOM Remote Control will NOT work the T V.
DTV ADJUSTMENT AND SETUP HOW TO OPERATE THE MENU 1 2 Press the MENU key to display the Main menu. Use the CURSOR keys to highlight menu item. MENU NAVIGATION MAP (Composite view) MAIN SUB MENUS All Channel Search No Digital Cable Search Yes No < > keys to select or adjust 3 4 Use the CURSOR menu item. 5 When you have finished making adjustments, press the EXIT key to return to normal TV viewing. Press ENTER to activate setting, if needed.
MENU OPTION—ALL CHANNEL SEARCH The All Channel Search will search for off-air digital and analog channels, and analog cable channels. The DTV can receive cable or off-air channels, but not at the same time. If after two searches the DTV still fails to detect any channels, the DTV will tune to Video1. Press the MENU key to display the Main menu. 2 Use the CURSOR keys to highlight the All Channel Search. Press ENTER. Use the CURSOR key to select Yes. Press ENTER.
MENU OPTION—DIGITAL CABLE SEARCH (Optional) This DTV can receive unscrambled (ClearQAM) digital cable channels, when available. However, not all cable companies provide ClearQAM digital channels. 4 Use the CURSOR key to select Yes. Press ENTER. Digital Cable Search process will take about 10 minutes, please be patient. 1 2 3 Tune to a Digital Channel. Press the MENU key to display the Main menu. Use the CURSOR keys to highlight the Digital Cable Search. Press ENTER.
MENU OPTION—DIGITAL ADD-ON SEARCH To add new digital channels to the existing antenna channel database, use Digital Add-on Search. Also, use this feature to add channels when broadcast towers are in multiple directions from your location. For more info go to www.antennaweb.org and type in your zip code to obtain specific tower and antenna information. Then adjust your antenna and repeat the Digital Add-on Search. 1 2 3 Tune to a Digital Channel. Press the MENU key to display the Main menu.
MENU OPTION—ANALOG ANTENNA SIGNAL (Optional) Use this feature to switch between analog off-air channels and analog cable channels. 1 2 4 Use the CURSOR keys to choose Cable or VHF/ UHF. Press ENTER. Tune to an Analog Channel. Press the MENU key to display the Main menu. 3 2 Use the CURSOR keys to highlight Analog Antenna Signal. Press ENTER. HELPFUL HINTS (PROBLEMS/SOLUTIONS) SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS Cannot select menu option, ANALOG ANTENNA SIGNAL.
MENU OPTION—CHANNEL SCAN MEMORY DELETING ANALOG OR DIGITAL CHANNELS FROM MEMORY Channel Scan Memory is a list of active channels that you can scan through using the Channel Scan CH (up) CH (down) keys. This list can be customized by deleting and/or adding channels. 1 2 3 4 Use the CHANNEL (CH ) keys or numerical 0 ~ 9 keys to select desired channel. Press the ENTER key to delete the channel. The display will change to “deleted.” Press the MENU key to display the Main menu.
MENU OPTION—CHANNEL SCAN MEMORY ADDING DIGITAL OR ANALOG CHANNELS TO MEMORY Channel Scan Memory is a list of active channels that you can scan through using the Channel Scan CH (up) CH (down) keys. This list can be customized by deleting and/or adding channels. 1 2 3 4 Use the CHANNEL (CH ) keys or numerical 0 ~ 9 keys to select desired channel. Press the ENTER key to add the channel. The display will change to “added.” Press the MENU key to display the Main menu.
MENU OPTION—DIGITAL CAPTION Closed-Captioning is text information transmitted along with the picture and sound. Turning Captioning ON causes the DTV to open these captions (digital or analog) and superimpose them on the screen. (Local broadcasters decide which caption signals to transmit.) 5 < > keys to select the desired Use the CURSOR effect. Digital Captions can be changed using the menu settings as shown. 1 Tune to a Digital Channel. 2 Press the MENU key to display the Main menu.
MENU OPTION—DIGITAL CAPTION (Continued) TO VIEW CAPTIONS Press the CAPTION key to select caption modes. Digital modes: Digital CC1 through Digital CC6, QuikCap, and Off. Analog modes: CC1 through CC4, QuikCap, and Off. INPUT POWER 1 2 3 4 5 6 7 8 INFO RECALL 0 1-- 9 SLEEP MUTE MENU ENTER CAPTION EXIT CH PIX SHAPE AUDIO VOL RESET CAPTION HELPFUL HINTS (PROBLEMS/SOLUTIONS) SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS NO Captioning Check Press Cannot customize Caption.
MENU OPTION—V-GUIDE (PARENTAL CONTROL) NOTE: THIS FEATURE IS DESIGNED TO COMPLY WITH THE UNITED STATES OF AMERICA’S FCC V-CHIP REGULATIONS. THEREFORE, IT MAY NOT FUNCTION WITH BROADCASTS THAT ORIGINATE IN OTHER COUNTRIES. TO SETUP V-GUIDE RATINGS 4 Use the CURSOR to select Adjust. Press ENTER. 5 Press CURSOR and < > keys to select MOVIE, TV Rating, or Content Ratings. (A green square will appear beside the selected item.
MENU OPTION—V-GUIDE (PARENTAL CONTROL) Continued ON-SCREEN VIEW OF BLOCKED TV PROGRAM TO UNBLOCK ALL MOVIE OR ALL TV RATING 1 2 3 4 Press the MENU key to display the Main menu. Use the CURSOR keys to highlight V-Guide. Press ENTER. Press ENTER to select Adjust. Highlight the “Allow All” option using the CURSOR and < > keys, if needed. Press ENTER. TO TEMPORARILY UNBLOCK MOVIE OR TV PROGRAM 1 2 3 Press the MENU key to display the Main menu. Use the CURSOR keys to highlight V-Guide.
MENU OPTION—V-GUIDE (PARENTAL CONTROL) Continued TV RATINGS (AGE/CONTENT-BASED) ALL CHILDREN—Program is designed to be appropriate for children ages 2-6. DIRECTED TO OLDER CHILDREN— Program is designed for children 7 and above. Material may include mild fantasy violence (FV) or comedic violence. GENERAL AUDIENCE—Program suitable for all ages. Contain little or no violence, no strong language or sexual dialogue or situations.
MENU OPTION—PICTURE/SOUND 1 2 3 Press the MENU key to display the Main menu. Use the CURSOR keys Picture/Sound. Press ENTER. to highlight Use the CURSOR keys to highlight Auto (factory preset settings) or Manual. Press ENTER. MANUAL ADJUSTMENTS 4 5 Use the CURSOR keys to select the option you want to adjust. Then use the CURSOR adjustment. < > keys to make an (CONTINUED ON NEXT PAGE.
MENU OPTION—PICTURE/SOUND (Continued) MANUAL ADJUSTMENTS (CONTINUED) 4 5 Use the CURSOR keys to select the option you want to adjust. Then use the CURSOR adjustment. < > keys to make an HELPFUL HINTS (PROBLEMS/SOLUTIONS) SYMPTOM No picture, sound (Digital Picture) CHECK THESE CONDITIONS TRY THESE SOLUTIONS Weak Adjust Signal. antenna/external connections. Check May be station trouble, NO signal broadcast. Poor Picture/Sound (watching Analog) antenna.
MENU OPTION—MENU LANGUAGE 1 2 3 Press the MENU key to display the Main menu. Use the CURSOR keys to highlight Menu Language. Press ENTER. Use the CURSOR keys to select English, Español, or Français.
MENU OPTION—ENERGY (POWER) SAVER This power saving feature reduces the brightness level. The power saving function options: • OFF – the feature is off and the power consumption is normal. • LOW – power saving level is low and the brightness level is lower than normal. • HIGH – power saving level is high and the brightness is set to the lowest level. 1 2 3 Use the CURSOR keys to highlight desired option. Press the MENU key to display the Main menu. Use the CURSOR keys to highlight Energy Saver.
MENU OPTION—PICTURE ROTATION (SCREEN SAVER) Displaying a still picture for a long time may cause an “afterimage” or “ghost” on the screen. To neutralize this situation, use the Picture Rotation function. Note: 1 2 3 Use the CURSOR keys to set Picture Rotation Off or On. When the Picture Rotation is set to ON, the DTV automatically changes the display position every 15 minutes to avoid afterimage. Press the MENU key to display the Main menu. Use the CURSOR keys to highlight Picture Rotation.
MENU OPTION—WHITE PAT TERN (PANEL REPAIR) Use this feature to repair the Plasma screen. 3 Use the CURSOR keys to set White Pattern Off or On. If an afterimage occurs, use the White Pattern feature immediately to repair the panel. The more severe the afterimage, the longer the curing process may take. It may be impossible to repair all cases of afterimage burn. The sooner you remove a still picture and activate White Pattern, the more likely it is that the panel can be repaired.
GLOSSARY OF TERMS Analog—Commonly refers to the current NTSC transmission standard for televisions. Aspect Ratio—The ratio of the width to the height of a TV screen independent of the screen size (x units wide by x units high). Analog is 4:3; Digital can be 4:3 or 16:9 (also called wide screen). ATSC—Advanced Television Systems Committee AV Jacks—Audio Video Jacks Bandwidth—The range of frequencies assigned to a broadcast channel. A TV channel is 6 MHz wide.
FREQUENTLY ASKED QUESTIONS (FAQ) 1. What channel do I put my television on to watch a DVD player? To determine where the DVD player is connected, turn the DVD player and TV on and set the TV on channel 3. Then press the INPUT key on the remote control to scroll through the signal inputs to locate the DVD player startup screen. 2. I am not receiving all of my VHF and UHF channels or cable channels? Make sure an antenna or your cable service is connected to the “ANT” Terminal.
ONE-YEAR LIMITED PARTS AND LABOR WARRANTY THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
