TABLE OF CONTENTS SWITCHING ON ------------------------------------------------------------- 4 OPERATING INSTRUCTION---------------------------------------------- 6 Remote control----------------------------------------------------------- 6 Teletext-------------------------------------------------------------------- 7 Menus --------------------------------------------------------------------- 8 Main menu---------------------------------------------------------------- 8 Picture adjustment-------------------
IMPORTANT INFORMATION Safety Ensure that your domestic mains supply voltage matches the voltage indicated on the identification sticker located at the back of your set. The TV set's components are sensitive to heat.The maximum ambient temperature should not exceed 35° Celsius. Do not cover the vents at the back or sides of the TV set. Leave sufficient space around it to allow adequate ventilation. Install the appliance away from any source of heat (fireplace, ...
Care Use a glass-cleaning product to clean the screen and a soft cloth and mild detergent to clean the rest of the set. Important: Using strong detergents, alcohol-based and abrasive products may damage the screen. Dust the vents at the back and sides regularly. Using solvents, abrasive or alcoholbased products could damage the TV set. Never open the appliance yourself since this may put you at risk or damage the appliance.
SWITCHING ON Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the remote control and the channel set-up procedure. 1. Place the TV on a solid surface. 2. Insert the aerial plug firmly into the aerial socket ANT at the back of the TV.
3 . Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). Please respect the environment and the relevant regulations. Before you dispose of batteries (or accumulators), ask your dealer whether they require special recycling and if he is able to take them back. and if he is able to take them back Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries.
OPERATING INSTRUCTION Remote Control Press this key to display : - the channel number when watching a TV program. - the input source when watching an AV program. Press this key to turn on or on stand-by the TV set. PR Press + or – to scroll through the channels. Press this key to mute the sound. Press this key again to restore it. Press + or – to increase or decrease the volume. 0~9 DIGIT BUTTONS To select a TV channel. Press this key to adjust the automatic shut-off time (from 0 to 120 minutes).
TELETEXT The Teletext service is available in many countries under a variety of names (TOP Text, Fastext, FLOF text,Videotext). It is provided as a free service by television broadcasters.This service provides a real wealth of information, available at any time, on weather, sports results, news, games, etc.
MENUS MAIN MENU Press the MENU button to display the Main menu. It offers the following options!: Picture adjustments (VIDEO), sound adjustments (AUDIO) and channels search menu (TV) (only in TV mode), it allows also to define your preferences in the SETUP menu. PICTURE ADJUSTMENTS Display the Main menu by pressing MENU button. Select the VIDEO option using the Ÿ / ⁄ buttons. Press the ÿ button to display the VIDEO menu. Use the Ÿ / ⁄ buttons to select each option.
Sound adjustments Display the Main menu by pressing MENU button. Select the AUDIO option using the ⁄button. Press the ÿ button to display the AUDIO menu. Use the Ÿ / ⁄ buttons to select each option. VOLUME!: adjust as required using the ! / ÿ buttons. BASS!: adjust the bass level as required using the ! / ÿ buttons. TREBLE: adjust the treble level as required using the ! / ÿ buttons. SRS!: Using ! / ÿ, activate or deactivate SRS function. SRS is an audio technology which improve the sound quality.
CHANNELS SEARCH Channels search involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on and follow all the steps in turn specified on this page. Display the Main menu by pressing MENU button. Select the TV option using the ⁄button. Press the ÿ button to display the TV menu. Use the Ÿ / ⁄ buttons to select each option. COUNTRY: Select the relevant country using the ! / ÿ buttons.
SWAP : Allows to swap 2 channels. - Using the ⁄ button, select the PROGRAMME option. - Using the ! / ÿ buttons, select the first channel to swap. - Using the Ÿ / ⁄ buttons, select the SWAP option. - Using the ! / ÿ buttons select the second channel to swap. - Press the MENU button, the 2 channels are swapped. Repeat this procedure to swap other channels. INSERT : Allows to move a channel. - Using the ⁄ button, select the PROGRAMME option. - Using the ! / ÿ buttons, select the channel to move.
PRÉFÉRENCES This menu allows to select the language for the menus as well as the colour of the screen when there is no video input. It allows also to set an automatic shut-off time. Display the Main menu by pressing MENU button. Select the SETUP option using the ⁄button. Press the ÿ button to display the SETUP menu. Use the Ÿ / ⁄ buttons to select each option. BLUE SCREEN : To have a blue screen when there is no video input or when the RF signal is very bad. Using the ! / ÿ buttons select ON.
PC MODE In PC mode, main menu is dfferent from the one in TV mode. Press the MENU button to display the Main menu. It offers the following options!: sound adjustments (AUDIO), PC and PIP settings, it allows also to define your preferences in the SETUP menu. For settings of AUDIO et SETUP menus, refer to pages 9 and 12.. PC SETTINGS Display the Main menu by pressing MENU button. Select the PC option using the ⁄button. Press the ÿ button to display the PC menu. Use the Ÿ / ⁄ buttons to select each option.
COLOUR: to adjust the colour temperature at your convenience. Press the ÿ button to display the COLOUR menu. Use the Ÿ / ⁄ buttons to select each option. Adjust as desired using the ! / ÿ buttons. PIP SETTINGS If you connect a PC to the TV set (in PC mode), you can display a picture in the picture from the PC. Press the MENU button to display the Main menu Select the PIP option using the ⁄button. Press the ÿ button to display the PIP menu. Use the Ÿ / ⁄ buttons to select each option.
CONTROLS (27!" / 32!"! (20!"! MODÈL) MODÈL) button: MENU button: (On the top of the TV set) (On the front of the TV set) Press this button to switch on or on standby the TV set. Press this button to display the main menu. Ÿ / ⁄ buttons: Press these buttons to select a channel or to choose an option in a menu. - / + buttons: Press these buttons to ajust the volume, access a sub-menu or perform an adjustment in a menu. SOURCE button: Press this button to select the input source.
AV SOCKETS (LOCATED AT THE BACK OF THE TV (27!" / 32!"! MODÈL) SET, ON THE LEFTSIDE) Illustrated cables are not supplied with the TV set. Audio and Video CINCH sockets(AV IN) (AV3) SCART socket (SCART IN) (AV1) SCART socket (SCART IN) (AV2) To connect a VCR, a camcorder, a DVD player or a satellite receiver. To connect a VCR, a camcorder, a DVD player, a satellite receiver, a decoder, a games console or a device supplying an RGB signal.
AV SOCKETS (LOCATED AT THE BACK OF THE TV (20!" MODÈL) SET, ON THE LEFTSIDE) Illustrated cables are not supplied with the TV set.. Audio and Video CINCH sockets (AV IN) (AV) To connect a VCR, a camcorder, a DVD player or a satellite receiver. S-Video socket and Audio CINCH sockets (AV IN) (S-VIDEO) To connect an S-Video VCR or an SVideo camcorder. Prise SCART (SCART IN) (PERITEL) To connect a VCR, a camcorder, a DVD player, a satellite receiver, a decoder or a games console.
HEADPHONE SOCKET (LOCATED AT THE BACK OF THE TV SET, ON THE RIGHTSIDE) When headphones are connected, the sound of TV set is cut. Adjust headphones volume level by using + / - buttons on the remote control. To switch off the sound of the headphone press the button on the remote control.
BEFORE CALLING SERVICE Please make these simple checks before calling service. Symptoms “ Ghost ” or double image No power No picture Good picture but no sound Good sound but poor color Poor picture Snowy picture and noise Horizontal dotted line Television not responding to remote control Items to Check and Actions to follow * Make sure the antenna is facing the right direction.. * This may be caused by obstruction to the antenna due to high rise buildings or hills.
Your guarantee UK and Ireland (GB + IE) Dear Customer, Thank you for purchasing this THOMSON product and for your confidence in our company. This product meets applicable safety requirements and has undergone stringent testing during manufacture.
