- Thomson multimedia VCR User Manual

8
Installation
J
J
Press the status key ( 4 ) to call up the control screen
and select the socket AV1, AV2, AV3 or AV4 with key
AV ( 22 ) of the remote control.
Video disk player
DVD
Camcorder
Satellite receiver
Other video recorder
TV set
The pictures from another set operating in the play mode and
connected to AV2 are conveyed to the socket AV1. When your
television is connected to this socket, you can watch the pictures
from the set connected.
“DOLBY”, “Prologic” and the double-D symbol are trademarks of DOLBY Laboratories
Licensing Corporation.
Hi-Fi system
The four cinch sockets
AUDIO IN/OUT (red and
white) enable you to
connect your video recorder
to the HiFi stereophonic
system. Thus, you will be
able to reproduce all the
sound effects of your tapes
(musicals, films...) on your
HiFi system.
AV2 AV4AV1 / AV2 / AV4
Decoder
Sockets AV1 / AV2 / AV3 / AV4
Audio/Video or Dolby Pro
Logic amplifier
The four cinch sockets
AUDIO IN/OUT (red and
white) and the two VIDEO
IN/OUT cinch sockets
(yellow) enable you to
connect your video recorder
to an Audio/Video
amplifier.
AV3
Camcorder
Connect your camcorder to the sockets AUDIO L (left), AUDIO R
(right), VIDEO IN and CAM/PAUSE and select socket AV3 on
your video recorder.
J
With compatible camcorders, the PAUSE socket facilitates copying by
triggering the recording mode of the video recorder as soon as the
camcorder switches over from PAUSE to PLAY. The video recorder
must be switched on Record Pause.
Other sets
AV1 - AV2
r9-GB3-DAE 12/05/2000 18:39 Page 8